Sales of new and existing homes retracted in April, now in line with mid-2020 levels, according to recently released data from the US Department of Commerce and National Association of Realtors. New home sales slipped to 591,000 units in April, down 17% compared to the previous month. The last time new sales were this low […]
Steel Market Update’s Steel Buyers Sentiment Index fell 8 points last week, now at the third-lowest level seen in the past 13 months. Our Future Sentiment Index fell 16 points, the largest survey-to-survey decline since March 2020 (when sentiment fell in response to the Covid pandemic). SMU surveys buyers every two weeks and asks how […]
The latest SMU Market Survey results are now available on our website to all Premium members. After logging in at SteelMarketUpdate.com, visit the Analysis tab and look under the “Survey Results” section for “Latest Survey Results.” Historical survey results are also available in the Survey Results section under “Survey Results History.” If you need help […]
Preliminary Census data recently released shows that steel imports in April declined 12% month-over-month to 2.73 million net tons, falling from March’s 26-month high of 3.09 million tons. May import licenses through May 23 and are currently at a 15-month low of 2.02 million tons, down 26% compared to April and 35% lower than the […]
Steel Market Update’s latest check of the market indicates steel mill lead times are slowly reverting back towards historical norms for most sheet products, while Galvalume and plate lead times inched up compared to two weeks prior. Lead times are now in line with levels seen in the beginning of 2022. Buyers surveyed this week […]
Flat-rolled steel prices were down again this week. Not as much as some had feared but the drops were more substantial than those hoping for a modest decline or stable pricing might have liked. The takeaway: Hot-rolled coil is now down $190 per ton ($9.50 per cwt) over the last five weeks. In other words, […]
Steel Market Update sources expect ferrous scrap prices to decline in June, following record high prices in March through May. Some expect prime grades to decline as much as $50 per gross ton from May, with obsolete grades down anywhere from $20-$50 per ton. “Markets are worsening by the day. It looks like there is continued […]
Editor’s note: Steel Market Update is please to share this Premium content with Executive members. For information on how to upgrade to a Premium-level subscription, email Info@SteelMarketUpdate.com. Following record price increases in March and April, prices for six of the seven steelmaking raw materials tracked in this SMU analysis declined over the last 30 days. […]
Domestic mill raw steel production increased again last week, with the utilization rate climbing to an 18-week high and production rising to a 16-week high. US output totaled 1,789,000 net tons in the week ending May 21, with a capacity utilization rate of 82.0%, according to the American Iron and Steel Institute (AISI). Production rose […]
The relationship between hot rolled and galvanized steel prices has fluctuated sharply over the last eight months, with galvanized selling anywhere between a $195-545 per ton premium over hot rolled in that time. The premium reached a record high in February, but then quickly dialed back in March as prices shot up in response to the war […]
The number of total active drilling rigs in the US rose again this week, while Canadian rigs remained flat, according to data from oilfield services company Baker Hughes. The number of active oil and gas drilling rigs in operation is important to the steel industry because it is a leading indicator of oil country tubular […]
The temptation to purchase foreign hot rolled over domestic steel remains high, according to SMU’s latest foreign versus domestic hot-rolled coil (HRC) price comparison. Select foreign HRC prices range from $164-364 per ton cheaper than domestic prices, after taking freight costs, trader margins and tariffs into consideration. The price differentials between domestic HRC and foreign import […]
Sheet steel prices are moving downwards after the March/April bump, while plate prices continue to hold their ground, according to SMU’s price indices published each Tuesday. Plate prices typically carry a premium over hot rolled prices because plate is a value-added product and requires more time on the mill. Hot rolled coil averaged $1,350 per ton ($67.50 per cwt) this week and has […]
Sheet prices slipped again this week on what some sources described as a summertime market that has arrived a few weeks earlier than usual. SMU’s hot-rolled coil price was down $15 per ton week-over-week (WoW) to an average of $1,350 per ton ($67.50 per cwt). Other sheet products also fell, with cold-rolled down $30 per […]
US heating and cooling equipment shipments jumped 24% from February to March to 2.28 million units, up 2% from levels one year prior, according to recent data from the Air-Conditioning, Heating, and Refrigeration Institute (AHRI). This is the third highest monthly shipment rate in our history, with June 2021 holding the record at 2.32 million […]
US apparent steel supply rebounded from February to March, rising 14% to 9.51 million tons, according to the latest US Department of Commerce and American Iron and Steel Institute (AISI) data. Recall that supply reached a six-year high last September at 9.92 million tons, declining each month thereafter and reaching an 11-month low in February (8.37 million […]
According to the latest Steel Market Update data, the spread between hot rolled coil prices and prime scrap prices has leveled out over the past eight weeks, after reaching an 18-month low in early March. The latest spread through May 10 is down compared to this time last year, but still higher than pre-pandemic spreads. […]
The latest SMU Market Survey results are now available on our website to all Premium members. After logging in at SteelMarketUpdate.com, visit the Analysis tab and look under the “Survey Results” section for “Latest Survey Results.” Historical survey results are also available in the Survey Results section under “Survey Results History.” If you need help […]
The firm grip mills have held on price negotiations in March and April has loosened, according to buyers polled in our latest steel market survey. A large portion of steel buyers now report that mills are willing to talk price to secure an order. Every two weeks, SMU asks survey respondents: Are you finding domestic mills willing to negotiate spot […]
Steel Market Update sources report ferrous scrap prices fell $75-100 per gross ton in May, following record high prices in March and April due to the war in Ukraine. Heavy melt (HMS) was down nearly $100 per gross ton, whereas shredded and busheling prices were down $75 per gross ton. “Demand is okay, but there’s just too much supply […]
Steel Market Update sources report ferrous scrap prices fell $75-100 per gross ton in May, following record high prices in March and April due to the war in Ukraine. Heavy melt (HMS) was down nearly $100 per gross ton, whereas shredded and busheling prices were down $75 per gross ton. “Demand is okay, but there’s just too much supply […]
Steel Market Update’s market check this week indicates steel mill lead times are shortening for both sheet and plate products, easing an average of 0.9 weeks compared to two weeks prior. This also marks the first time lead times have fallen consecutively since January. Lead times for all tracked products are now roughly in line with levels […]
Foreign steel imports continue to hold a competitive price advantage over domestic steel, albeit at a slightly lesser potential discount this week compared to last. According to SMU’s latest foreign versus domestic hot-rolled coil (HRC) price comparison, select foreign HRC prices range from $92-345 per ton ($4.6-$17.25 per cwt) cheaper than domestic prices, after taking […]
The Energy Information Administration’s May Short-Term Energy Outlook (STEO) remains subject to a high level of uncertainty due to Russia’s invasion of Ukraine. Regarding price forecasts, the EIA continues to warn that “actual price outcomes will largely depend on the degree to which existing sanctions imposed on Russia, any potential future sanctions, and independent corporate […]
US raw steel production increased to 7.57 million net tons in March, up 8% from February’s 12-month low, according to recently released American Iron and Steel Institute (AISI) data. While up month over month, March holds the second lowest monthly production rate of the past 13 months. Recall that last August production reached a 20-month high of 8.29 million tons. […]
Sheet prices have fallen sharply following weeks of more modest declines. The big drops this week prompted SMU to shift all its sheet price momentum indicators from neutral to lower. SMU’s hot-rolled coil price plunged $75 per ton ($3.75 per cwt) week-over-week, falling well below the $1,400-per-ton threshold. Cold rolled fell $55 per ton, galvanized […]
US steel exports jumped 16% in March to 843,000 net tons, now the highest monthly level seen since June 2018, according to the latest US Department of Commerce data. On a 12-month moving average, March exports continue to hold onto a 3-year record high at 741,000 tons per month. Total March exports are 7% higher than levels seen […]
Final US Department of Commerce data shows that steel imports in March rebounded 32% month-over-month to 3.09 million net tons, a 2+ year high. But April import licenses through May 4 are currently at 2.58 million tons, down 17% from March. (That said, April is still up 10% compared to February.) Final finished steel imports were 2.52 […]
The number of total active drilling rigs in the US rose again this week, while Canadian rigs continued their seasonal decline, according to data from oilfield services company Baker Hughes. The number of active oil and gas drilling rigs in operation is important to the steel industry because it is a leading indicator of oil […]
Foreign steel imports continue to hold a competitive price advantage over domestic steel, with the spread between the two widening nearly every week since mid-March. According to SMU’s latest foreign versus domestic hot-rolled coil (HRC) price comparison, select foreign HRC prices range from $114-375 per ton cheaper than domestic prices, after taking freight costs, trader margins […]