This week we are seeing a “settling” of prices as buyers work with their suppliers. We are seeing a mixed market which was described to us by an executive with a large service center when he told us, “… it’s quite perplexing. The domestics certainly are seeing increased activity, slightly longer lead-times, and slightly higher spot […]
Last month Steel Market Update (SMU) forecast flat shipments for the month of April. We believed at that time that the U.S. flat rolled steel service centers would ship 108,600 tons per day or total flat rolled shipments of 2,389,200. According to the Metal Service Center Institute (MSCI), which released shipment and inventory data for […]
Good evening from Merrillville, Indiana, home of our Steel 101 workshop which started earlier today and continues tomorrow. We toured the NLMK USA Portage, Indiana steel mill this afternoon in absolutely perfect conditions. Its cool here (high 50’s) and cloudy today (we are close to Lake Michigan) after arriving to high 70’s and sunny skies. […]
First, a quick note to our readers that follow the Steel Market Update (SMU) indices closely, after speaking with dozens of steel buyers of hot rolled products at the Metal Industry Dinner (Boy Scout Dinner) in Chicago we adjusted the lower end of our range to $440 per ton. This resulted in our HRC average […]
Networking is always an important piece of doing business in the steel business. There are, in my opinion, three great places to network and each is a little different from the others. I attended the Metals Industry Dinner in support of the Chicago area Boy Scouts (Boy Scout Dinner) on Thursday of last week. The […]
According to the Metal Service Center Institute (MSCI), U.S. steel service centers shipped 3,465,900 tons of carbon steel (all products) at an average of 157,500 tons per day during the month of April 2015. Total carbon shipments were down 5.6 percent over the previous month and 9.0 percent lower than one year ago. The daily […]
Short comments this evening as I am attending the Metals Industry Dinner (Boy Scout Dinner) in Chicago. The sentiment within the room was mostly optimistic, although there were a number of conversations about April not being a great month or not meeting expectations. This would help explain some of the weakness seen in the MSCI […]
This week Steel Market Update adjusted our Price Momentum Indicator to Higher from Neutral. Based on our checks of the steel buying community, prices are beginning to firm and the $20 per ton price increase announced by a number of the steel mills appears to be sticking. SMU is of the opinion as long as […]
The market has continued to firm as steel buyers return to the market and lead times slowly begin to extend. We are also seeing a return to the more traditional spreads between hot rolled base prices and those of cold rolled and coated. The normal spread has been $100 to $120 per ton depending on […]
For the first time in many months we have seen a break in spot market steel pricing coming out of the service centers. Manufacturing companies have been reporting to Steel Market Update via our flat rolled steel market questionnaire for a number of months that service center spot prices were falling. In the survey just […]
As we review steel import license data for the first time during the month of May we want to remind our readers not to read too much into the numbers. At this point in the month, we are trying to compare the second week of the month of May against the four previous months to […]
Earlier today Nucor announced a price increase of $25 per ton on carbon and alloy plate as well as heat treated plate products. The increase was to be effective “immediately.” Our sources are advising of at least one other plate mill that was telling their customers that they would be following the Nucor lead and […]
Flat rolled prices have begun to climb out of the hole which has been almost a year in making. Steel Market Update and Platts both saw benchmark hot rolled prices as being up $10 per ton this past week while CRU had HRC up $1 per ton. The HRC average of the three reporting indexes […]
The domestic flat rolled steel mill lead times have begun to move out, according to the results from our flat rolled steel analysis questionnaire conducted this past week. We are seeing movement on all four products: hot rolled, cold rolled, galvanized and Galvalume. Lead times had bottomed in January and February and we started to […]
The domestic steel mills are still willing to negotiate according to the majority of last week SMU flat rolled steel market survey respondents. However, for the first time in many months we are seeing a break in the “tell me what it’s going to take” negotiating tactic and more of the “here is our bottom, […]
Buyers and sellers of flat rolled steel are split over whether or not the price increase announcements of two weeks ago will actually be collected. This past week we invited approximately 600 companies to participate in our flat rolled steel market survey. Of the more than 100 companies who responded fifty-three percent told SMU that […]
Will Domestic Price Increases Create Opportunities for Foreign Steel? Over the past few months domestic steel prices have become competitive against foreign steel imports. With the price announcements SMU wondered if the increases would widen the spread, thus creating an opportunity for more foreign steel to come to the U.S. During last week’s flat rolled […]
Last week was a very busy week, not only for the steel mills and their customers as they try to determine exactly where steel prices are going to go from here, but also for Steel Market Update. We produced our early May flat rolled steel market analysis (survey) and posted the results online for our […]
Buyers and sellers of flat rolled steel continue to be optimistic about their company’s ability to be successful both now and into the future. However, Steel Market Update has been seeing small adjustments lower to both our current and future Sentiment Indices. Future Sentiment, which measures how buyers and sellers feel about their company’s ability […]
Perhaps the scrap market can best be described by those actively sourcing/selling ferrous scrap. Here is how one of the larger groups saw the market this week, “The scrap trade was quite tumultuous this week. Scrap demand, both export and domestic was robust, forcing the scrap processors to take a hard look at what sales […]
I had an interesting email from one of our members who expressed an issue with the reduction of articles written by me. Here is a portion of the email, “When we first subscribed to your publication several years ago, we found that John P was doing most of the writing and he would stick his […]
Late last week I asked the vice president of one of the steel mills which had announced price increases if they were indeed collecting higher prices and we received a one word response “Yep.” Earlier today we spoke with a conversion mill about the status of their pricing and they provided a more descriptive look […]
The U.S. Department of Commerce released Final Census Data for the month of March. The final total of foreign steel imported into the United States during the month was 3,615,960 net tons. This is a very small decrease from the 3.7 million tons received during the month of February but is well below the 3.9 […]
All of the domestic steel mills located east of the Rockies (except U.S. Steel) made flat rolled price increase announcements this past week. The first steel index to note an upward move in pricing was Platts where by the end of this past week had taken their hot rolled index up $5 per ton from […]
Late last week AK Steel announced a $20 per ton price increase which matches the original increase announcement out of ArcelorMittal. As the week ended, the big mill missing from the charge at higher prices was U.S. Steel. The only mill to stick its neck out there and put specific base price levels on their […]
During the latest slew of earnings conference calls by the domestic steel mills, analysts were relentless in their pursuit of information regarding trade cases which would conceivably impact the flow of imported steel into the United States. The steel mill CEO’s and other mill executives associated with the conference calls were more than willing to […]
There are always two sides to any story. The domestic steel mill view is the influx of foreign steel is due to illegal dumping by the companies or countries exporting steel to the United States. The manufacturing companies who are benefiting from the lower priced imports (and their impact on domestic steel prices) have a […]
Scrap dealers are expecting sideways pricing as we enter the month of May and negotiations with the various steel mills. Our sources are advising SMU that the weakest area continues to be the Midwest (Indiana and Ohio Valley) while the East and South have seen demand strengthening. Even though the Midwest is the weakest area […]
Steel Market Update spent time over the past few days speaking with trading companies and customers who buy foreign steel to see if the flow of orders has subsided or remains in place. We were especially interested in cold rolled and coated products (galvanized and Galvalume in particular) since so much has been made about […]
Today is the final day of April and, as is our habit, we will review much of the critical data reviewed or created during the month. SMU Price Momentum Indicator remained at Neutral where it had been for the entire month. SMU has been forecasting a change in the momentum pushing prices from lower to […]