Please be advised that I will be traveling to Tampa, Florida and will be at the Port of Tampa Steel Conference on Monday and Tuesday of this week. I will return to my office on Wednesday. For those of you who have not been to a steel conference, the Port of Tampa is a good […]
SMU scrap sources are all telling us that the recent transactions with Turkey have “surprised” dealers, the net result may well be a much weaker domestic scrap market than anticipated as we move into February negotiations next week. A weaker scrap market, especially if it were to drop $35-$40 per gross ton would dampen price […]
Are steel prices poised to give back some of the gains collected over the past few months? Steel Market Update and our readers have been debating this subject as word of mills being more receptive to negotiate steel pricing has been leaking out into the market. On Tuesday of this week, SMU published an article […]
Steel Market Update (SMU) received the following question from one of our readers: “We are a galvanized sheet metal fabricator. We purchase around 5 million pounds a year (mostly 26ga-14ga). I was hoping you could help us out. We have not had to raise prices in years but galvanized pricing has steady risen over the […]
January foreign steel import license data released by the U.S. Department of Commerce earlier this week is suggesting total steel imports will be in line with November and December at approximately 2.8 million net tons. We continue to see a drop in the level of hot-rolled tons coming into the U.S. market as fewer countries […]
I want to take a moment to thank all of the attendees who attended our Steel 101 workshop in Huntsville, Alabama. We had a great two days and the Nucor team at Decatur did a great job hosting our mill tour on Tuesday of this week. Thank you again to Nucor for supporting our educational […]
The market did not collapse after our article about potential cracks in hot rolled. In fact, the hot rolled prices actual increased by $5 per ton while the other items remained intact at last week’s levels. Although SMU did collect data on hot rolled that was lower than the week prior, the lower offers were […]
SMU Price Momentum Indicator has been pointing to Higher flat rolled steel prices since late October (12 weeks). Based on our analysis of last week’s steel market trends survey as well as direct contact with buyers today, SMU Price Momentum has not changed and our expectation is for prices to move higher over the next […]
Are cracks starting to develop in the floor of steel prices? Are any cracks a harbinger to a reversal of flat rolled steel prices? It is too early to tell. However, buyers and sellers of steel need to be aware of that the markets may be in the early stage of change. Since the beginning […]
Only two of the steel indexes followed by Steel Market Update reported prices this past week (SteelBenchmarker only reports twice per month). We saw mixed results with Platts taking their hot rolled average to $630 per ton (up $20) while our SMU HRC index average was up $5 per ton to $625 per ton. Platts […]
SMU sources advised that US Steel Great Lakes had a furnace issue due to a leaking water line and a weld gas explosion. They were down for about a shift and are now back up and working for the time being. I wrote the Price Momentum article this evening to make sure that there was […]
The Final Thoughts section is the area where I get to provide my opinions about what I am seeing and sensing in the market. I have been debating over the weekend whether or not now is the time to adjust our Price Momentum Indicator from Higher to Neutral. A Neutral reading would mean prices are […]
The steel industry does not seem to be concerned about the transition of power as Donald Trump becomes the 45th President of the United States. There have been a number of cabinet appointees who have testified about the domestic steel industry and the need to “level the playing field” by taking governments, such as China, […]
The Metal Service Center Institute (MSCI) released shipment and inventories data for the month of December as well as the full calendar year 2016. Total steel products, carbon flat rolled, steel plate and pipe and tube saw shipments drop and inventories rise during the month of December compared to the prior year. The U.S. steel […]
Steel mill lead times, the amount of time it takes for steel mills to produce new orders of hot rolled, cold rolled, galvanized or Galvalume products, continue to remain extended according to the results of Steel Market Update flat rolled steel market trends analysis conducted during the course of this week. Hot rolled lead times […]
Flat rolled steel buyers reported the domestic steel mills as not willing to negotiate prices on flat rolled steel products. This is a continuation of the position we reported beginning in November after the initial flat rolled steel price increase announcements being made in late October. Only 17 percent of the respondents to our flat […]
The Chinese represent only 7 percent of the total plate imports into the United States. The CTL plate dumping/CVD suits will now focus on the countries that represented 66 percent of the plate imports: Austria, Belgium, France, Germany, Italy, Japan, Korea and Taiwan. The Final Determination on these countries is due on March 30th. The […]
Flat rolled steel prices continued their march higher this week in reaction to the latest price announcements made by the U.S. steel mills earlier this month. Where steel prices go from here will depend on lead times, the domestic mill order books and how much inventory is available. We will have a glimpse at each […]
Flat rolled steel prices are fast approaching the highs achieved during calendar year 2016. Today, Steel Market Update (SMU) released our new hot rolled coil index average at $625 per ton. This is within $10 per ton of the $635 per ton high reported during calendar year 2016. In the case of galvanized steel our […]
On Monday, California Steel Industries (CSI) advised their customers that their March 2017 order book is now open and that transaction (spot) pricing would be increasing by $40 per ton on hot rolled, hot rolled pickled & oiled, cold rolled and galvanized steel products produced by the mill. California Steel began increasing prices as they […]
Late today the U.S. Department of Commerce released updated foreign steel import license data for the months of December and January. Since we are now half way through the month our interest is mainly with the month of January as we are trying to determine if there is any pull-back in flat rolled steel tonnages. […]
The Chinese government is attempting to make a stand against the extreme pollution plaguing the country. One of the largest polluting industries is the steel industry through its use of coal. The march against pollution is expected to have mixed results when it comes to iron ore and steel prices. Iron ore prices were reported […]
Our next Steel 101 workshop will be held in Toledo, Ohio on April 11-12th. Included will be a tour of the North Star Bluescope steel mill. We should have details and registration available on our website by the end of the week. Late today I received a note from one of my pig iron sources. […]
We were asked a question by one of our readers regarding importations of fabricated steel products. They wanted to know how can their company be assured the roll-formed products made from steels covered under the AD/CVD orders are exempt from the scope of the orders. We turned around and asked trade attorney Lewis Leibowitz to […]
Flat rolled steel and plate prices continued their march higher this past week based on the steel price indexes followed by Steel Market Update. Benchmark hot rolled coil (HRC) which is the base thickness prior to extras being added, is working its way toward the latest “minimums” set out by ArcelorMittal in their recent price […]
BUTLER, IND. – January 12, 2017 – Jerry Henry, Jr. announced today that he has acquired the remaining 50 percent equity interest in Paragon Steel, LLC. Paragon Steel is a distributor and “toll processor” of flat-rolled steel products for a wide range of customers. The company was founded in 1994 as a joint-venture between Henry […]
A special thank you to the companies who have stepped up early to be sponsors at this year’s Steel Summit Conference: Our Conference Sponsor – Pacesetter as well as our two Corporate Sponsors – Bank of America and Mill Steel. We also have one break sponsor at the moment – Kenwal and we have two […]
The U.S. Department of Commerce (DOC) has released Final Census numbers on foreign steel imported into the United States through November 2016 and has updated license data for the month of December 2016. This provides us with our first look at imports for the year so we can do a comparison against 2015 to see […]
I got a note from one of my Asian trading sources yesterday explaining the reason for some of the price volatility seen in the Chinese markets earlier this week. He told us, “We see Ore at below USD50/mt in 2017. Reasons being that China is shutting down capacity big time, probably about 150 million MTS […]
OK, don’t get freaked out (yet) as the new flat rolled steel base price increases aren’t really impacting the numbers for this week. However, there were a couple of steel mills already seeking higher hot rolled, cold rolled and coated prices prior to the announcement. We did collect some of that data in tonight’s steel […]