The U.S. Department of Commerce released license data collected through December 1st for the month of November. Based on license data (which can vary from the final census numbers) November foreign steel imports should be approximately 2.5 million net tons. If correct, this would be the lowest level seen since December 2013 which was the […]
The following lead times are averages generated out of the flat rolled steel market analysis we conducted beginning on Monday of this week. Actual mill lead times will vary from mill to mill and we always recommend that buyers speak to their mill representatives in order to obtain the most up to date lead times […]
Much like lead times, domestic mill spot price negotiations have been mired in the muck and not able to get any momentum going back to the spring of this year. Those responding to this week’s flat rolled steel market analysis are almost unanimous in their description of the willingness of the domestic mills to discuss […]
Tonight I thought I would present a question posed to me within the past couple of days and ask for your input in answering the question. How would you respond to this? Has the steel industry in the US stopped following laws of economics or are we living the great delusion of “ok” demand? Consider […]
The frustration is beginning to build in the voices of some of the steel buyers as they deal with continuing depreciating flat rolled steel inventories. Prices have been falling since the middle of May 2015 when prices hit a cycle peak of $685 per ton ($34.25/cwt). With our latest adjustment to our hot rolled coil […]
The month of November saw a continuation of lower flat rolled steel prices, Momentum and Sentiment as buyers and sellers struggle to find a bottom to what has become an extended slide going back to May 2015. November benchmark hot rolled prices (SMU average) Dropped $15 per ton during the course of the month and […]
Holiday weeks tend to be “quiet” when it comes to steel price movement but, according to the flat rolled steel indexes followed by Steel Market Update, last week was an anomaly. SMU saw the market as being relatively stable with either no movement or small adjustments of $5 per ton on hot rolled and hot […]
Last week we received information about the expectation for ferrous scrap price negotiations between the domestic mills and their scrap suppliers for the month of December. Over the weekend one of our east coast scrap sources provided us more details as to what they expect this week as negotiations begin in earnest: I am not […]
I thought it would be nice to send out our Premium newsletter to all of our readers today since we did not publish over the weekend due to the Thanksgiving Holiday here in the United States. We are conducting our early December flat rolled steel market analysis this week. This means those who participate in […]
For our U.S. customers, welcome back from the Thanksgiving Holiday. We are a little more than three weeks from our next break for the Christmas and New Year Holidays. Then we plow into 2016 and my gut tells me by then things may begin to change. We still have our SMU Price Momentum Indicator pointing […]
All eyes are looking ahead to after the Thanksgiving Holidays. As lead times approach the New Year (for hot rolled coil, most coated products are already well into 1st Quarter 2016) and customers think of restocking/preparing for 2016 business levels, this tends to be prime time for the domestic mills to announce price increases. To […]
Recently, US Steel CEO Mario Longhi was quoted as saying that a Section 201 investigation may be needed to save the domestic steel industry. We want our readers to learn more about what a Section 201 means so we enlisted the help of trade attorney Lewis Leibowitz who was actively involved in the last Section […]
We learned late this afternoon that two domestic steel mills are offering to pay higher prices for shredded scrap from east coast dealers. Shredded scrap buy offers have been made at $180-$185 per gross ton up $10 to $15 per gross ton higher than November numbers (and higher than October numbers since November prices moved […]
On Monday of this week, Steel Market Update conducted an interview with Michael McQuade, CEO for US Steel Canada. The purpose of our interview was to see if USSC will be a viable supplier for 2016 automotive contracts. Many times articles begin by our customers asking what might be construed as a simple question that […]
Tonight’s issue should have plenty of “meat on the bone” for everyone to read and re-read over the Thanksgiving Holidays. Due to the Holidays we will not publish our Thursday and Sunday evening issues. Our next full issue will be Tuesday, December 1st. However, as always, if news breaks that we feel needs your attention […]
Flat rolled steel and plate prices continued to slide this past week according to the various steel indexes followed by Steel Market Update. SMU saw prices as being sideways on hot rolled, down $10 on cold rolled, down $5 on galvanized and down $10 on Galvalume. Both CRU ($376) and Platts ($375) dropped their averages […]
Last week Steel Market Update conducted our mid-November flat rolled steel market analysis. We invited slightly less than 600 individuals representing more than 550 companies to participate. Of those responding 44 percent were connected to manufacturing companies, 41 percent with service centers/wholesalers, 7 percent with trading companies, 4 percent with steel mills, 3 percent with […]
Manufacturing companies reported their service center suppliers dropping spot steel prices this past week. Ninety percent of the manufacturing respondents responding to last week’s SMU flat rolled steel market questionnaire reported service centers as dropping spot pricing. This continues a growing trend for distributors to dump inventory at reduced margins (or at no margins at […]
This week is Thanksgiving (Thursday) and we are one month away from the Christmas Holidays as well. Here is what our publishing schedule will look like over the next five weeks or so. We will publish on Tuesday of this week and then we will not publish again until the following Tuesday, December 1st. We […]
Twice per month Steel Market Update (SMU) canvasses buyers and sellers of flat rolled steels on a wide variety of topics. One area we probe is how they feel about their individual company’s ability to be successful in today’s economy (Current Sentiment) as well as what they think business conditions will look like three to […]
Twice per month, Steel Market Update (SMU) conducts an analysis of the flat rolled steel market from the perspective of active buyers and sellers of sheet and coil products. We invite approximately 560 companies to participate through the use of a questionnaire that we have been using since 2008. One of the areas probed is […]
Based on the results of this week’s flat rolled steel market analysis (survey) conducted by Steel Market Update (SMU) the flat rolled steel mills continue to aggressively pursue orders by negotiating spot prices on hot rolled, cold rolled, galvanized and to a slightly lesser extent, Galvalume. As you can see by the graphic shown below, […]
A note to our Premium level members, we will have another supplemental issue out tomorrow which will contain our Apparent Excess/Deficit forecast for carbon flat rolled service centers in the United States. We also expect to have our Power Point presentation regarding this week’s flat rolled steel analysis (survey) online by early afternoon. We will […]
Flat rolled steel prices moved sideways to slightly lower this week, an improvement from the almost straight-line dive we have been reporting for the last couple of months. Our benchmark hot rolled index remained the same as the week prior at $380 per ton ($19.00/cwt) but we did pick up some minor movement at the […]
Shipments of all steel products out of the U.S. based steel service centers totaled 3,363,900 tons, according to the Metal Service Center Institute (MSCI) in data released on Monday. Total tonnage was up 3.2 percent compared to September but was down 14 percent year-over-year. The daily shipment rate was 152,900 tons which was 1.5 percent […]
Late Tuesday afternoon the U.S. Department of Commerce released import license data through the 17th of the month. Based on the licenses received during the first 17 days of the month, November is trending toward a similar month, September, at approximately 2.8 million net tons. Remember, this is only a trend based on the license […]
For those of you who have been steady readers and members of Steel Market Update you know that the purpose of my Final Thoughts is for me to voice some of my thoughts and opinions on a wide range of topics. I am going to use this forum today to speak about what I am […]
Flat rolled and plate prices continued to erode this past week according to the various steel indexes followed by Steel Market Update. With the exception of SteelBenchmarker (who tends to be behind the other indexes due to it only collecting market price intelligence twice per month), all of the indexes are showing hot rolled prices […]
Our thoughts and prayers go out to those affected by the events in France on Friday evening. Our hope is that the world can use the events of the past few weeks in order to galvanize efforts to ultimately rid those who would prefer the world in Chaos. We have opened registration for our Leadership […]
Earlier this week, Steel Market Update adjusted our benchmark hot rolled coil (HRC) index to reflect the average pricing we have been seeing as of the beginning of this week. We reported our average as being $380 per ton ($19.00/cwt) which also happens to be the lowest hot rolled price seen during the height of […]