Business activity at architectural firms was stable in June vs. May, though billings were still increasing, according to the American Institute of Architects (AIA)/Deltek Architecture Billings Index (ABI) score. May’s rebound of 51.0, the highest reading since February, was slightly than June’s 50.1 index. Both readings are an improvement over April’s index of 48.5, and it’s […]
Steel prices continued to ease each week throughout June, following declines in May as well. Hot rolled prices were $1,190 per ton ($59.50 per cwt) the first week of June. Prices then slipped between $45 and $90 each of the following weeks, with the SMU index averaging $995 per ton as of last Tuesday. (This […]
Steel prices eased each week in May, following increases in March and most of April. Hot rolled prices were $1,440 per ton ($72 per cwt) the first week of May, just $40 lower than the mid-April peak. Prices then slipped between $15 and $75 each of the following weeks, with the SMU index averaging $1,255 […]
Steel prices were relatively steady in April, following increases in March. Hot rolled prices were at $1,460 per ton ($73 per cwt) the first week of April, the highest level seen since January 2022. Prices then bounced around within a $30 per ton range for the remainder of the month, with the SMU index averaging $1,450 per ton as […]
Steel prices rose each week in March, and the increases were the first in six months. Hot rolled prices were down to $1,000 per ton ($50 per cwt) the first week of March, the lowest level seen since December 2020. Prices then surged $435 per ton throughout the month, with the SMU index averaging $1,435 per ton […]
February marked month six of declining steel prices, following a 12-month streak of continuous price increases. Hot rolled prices declined $215 per ton throughout the month, with the SMU index averaging $1,020 per ton at the end of February (recall our HR average this week declined another $20 to $1,000 per ton). The SMU Price Momentum Indicator for sheet products was […]
January marked the fifth consecutive month of declining steel prices, following a year-long streak of continuous price increases. Hot rolled prices declined $200 per ton throughout the month, with the SMU index averaging $1,335 per ton ($66.75 per cwt) as of Tuesday, Jan. 25. The SMU Price Momentum Indicator for sheet products remains at Lower since its mid-October adjustment. January […]
Steel prices declined for the fourth consecutive month in December, following a year-long streak of continuous price increases. Hot-rolled coil prices declined $130 per ton throughout the month, with the SMU index averaging $1,600 per ton ($80.00 per cwt) as of Tuesday, Dec. 21 (SMU did not published updated prices on Dec. 28). The SMU Price Momentum […]
Steel prices declined for the third consecutive month in November, following a 12-month streak of continuous price increases. Hot-rolled coil prices declined $105 per ton throughout the month, with the SMU index averaging $1,770 per ton ($88.50 per cwt) as of Tuesday, Nov. 30. The SMU Price Momentum Indicator for hot-rolled coil was adjusted from Neutral […]
October saw a gradual decline in steel prices for the second consecutive month, following one full year of continuous price increases. Hot rolled steel prices decreased $45 per ton throughout the month, with the SMU index averaging $1,885 per ton ($94.25 per cwt) as of Tuesday, Oct. 26. The SMU Price Momentum Indicator for hot […]
Steel prices gradually declined through the month of September, following one full year of increasing prices. Hot rolled steel prices decreased $35 per ton ($1.75 per cwt) throughout the month, with the SMU index averaging $1,920 per ton ($96.00 per cwt) as of last Tuesday. The SMU Price Momentum Indicator was adjusted to neutral the […]
Steel prices continued to climb through the month of August, marking one full year of increasing prices. Hot rolled steel prices increased $45 per ton ($2.25 per cwt) throughout the month, with the SMU index averaging $1,935 per ton ($96.75 per cwt) as of Tuesday. The SMU Price Momentum Indicator remains unchanged since the August 2020 adjustment to higher, indicating prices […]
Steel prices continued to climb through the month of July, now the 11th consecutive month prices have increased. Hot-rolled steel prices increased an average of $30 per ton ($1.50 per cwt) each week, with the SMU index averaging $1,860 per ton ($93 per cwt) as of last Tuesday. The SMU Price Momentum Indicator has remained unchanged since the […]
Steel prices rose even higher through the month of June, now the 10th consecutive month prices have increased. Hot rolled steel prices increased an average of $30 per ton each week, reaching $1,770 per ton in SMU’s latest check of the market. The SMU Price Momentum Indicator has remained unchanged since the August 2020 adjustment […]
Steel prices continued to climb higher in May, now the ninth consecutive month prices have increased. Hot rolled steel prices increased an average of $23 per ton each week, reaching $1,590 per ton as of last week when this article was filed. The SMU Price Momentum Indicator has remained unchanged since the August 2020 adjustment […]
Limited supply and strong demand continued to push steel prices higher throughout April, now the eighth consecutive month in which prices have increased. Hot rolled steel prices increased an average of $25 per ton each week, reaching $1,440 per ton by the end of April, exceeding any historical price by far. The SMU Price Momentum […]
For the seventh consecutive month, steel prices rose throughout March, fueled by a continuation of strong demand and limited supply. Hot rolled steel prices averaged $1,300 per ton by the middle of the month, far exceeding any historical price record, and reached $1,330 by the last week of March. The SMU Price Momentum Indicator has […]
Steel prices continued their upwards climb in the month of February, fueled by strong demand and tight supply. Hot rolled steel prices surpassed $1,200 per ton in the third week of the month, reaching levels never before seen. Steel Market Update’s hot rolled price index reached $1,210 per ton by the end of February, up […]
Steel and scrap prices continued to climb throughout January, fueled by strong demand and tight supply. Hot rolled steel prices surpassed $1,000 per ton in the first week of the year, levels not seen in over a decade. Steel Market Update’s hot rolled price index reached $1,140 per ton by the end of January, up […]
Strong demand and tight supply pushed steel prices upwards throughout December, with hot rolled prices nearing quadruple digits as 2020 came to a close. Steel Market Update’s hot rolled price index reached $985 per ton by the end of December, up $180 per ton or 22 percent from the beginning of the month. The SMU […]
Steel prices continued to climb in November on strong demand and tight steel supplies. Steel Market Update’s hot rolled price index reached $770 per ton by the end of November, up 10 percent from the beginning of the month. The SMU Pricing Momentum Indicator remained at Higher, indicating prices are expected to rise further over […]
Steel prices continued to climb in October as demand rose further on hot rolled, cold rolled and galvanized products. Steel Market Update’s hot rolled price index averaged $665 per ton in October, up nearly $100 over the previous month and up over $200 compared to August. The SMU Pricing Momentum Indicator remained at Higher, indicating […]
Steel prices continued their upward trajectory in September as demand rose further and mills announced more increases on hot rolled, cold rolled and galvanized products. Steel Market Update’s hot rolled price averaged $568 per ton in September, an increase of more than $100 month/month, and has since topped the $600 mark. Average prices for prime […]
Steel prices gained momentum in August as demand improved and the mills announced a new round of price increases. As of last week, Steel Market Update’s hot rolled price average had risen to $485 per ton, up $45 in just two weeks from the mid-month low, and has since topped the $500 mark. Scrap prices were flat […]
Steel prices declined throughout the month of July, although mills announced price increases in the third week of the month. As of last week, Steel Market Update’s hot rolled price average had declined to $450 per ton. Scrap prices declined from June to July by $18-48 per ton. SMU adjusted its Price Momentum Indicator from Lower […]
Steel prices rose in the beginning of June, following May price increase announcements by the mills, but began to decline in the middle of the month and reached $480 per ton as of this week. Scrap prices were flat to down over May, while zinc and aluminum prices increased in June. SMU Buyers Sentiment Index […]
The Architecture Billings Index remained in contraction in May with a score of 32.0 following a record drop in billings in April, said the American Institute of Architects. Although the monthly scores moderated slightly, billings continued to decrease, inquiries continued to decline and the value of newly signed contracts remained at near record-lows. The projects […]
Steel prices inched upwards during the month of May following price increase announcements by the mills, with the SMU hot rolled index reaching $500 per ton last week. Scrap prices increased over April, as did zinc and aluminum prices. SMU Buyers Sentiment Index readings increased over April, with Current Sentiment coming back into positive territory […]
Both steel and scrap prices decreased in the month of April, down anywhere from $15 to $75 per ton between each product, as the effects of the coronavirus shutdowns impacted the market. SMU Buyers Sentiment Index readings showed significant declines over March, with Current Sentiment sliding into negative territory and reaching a low of -8, […]
The Architecture Billings Index remained positive in November and rose over four points to 54.7, according to the Wednesday release by the American Institute of Architects (AIA). This is the 14th consecutive month of increasing demand for architectural firms’ services and the strongest billings growth figure in 10 months. The project inquiries index rose to […]