Furnace Outage Keeps AK from Taking Advantage of Higher Spot Prices AK Steel is expecting a loss for the third quarter that includes approximately $12 million uncovered by insurance related to an unplanned furnace outage in the third quarter. In its guidance released Thursday, the company said the blast furnace outage at Middletown Works reduced […]
We heard it earlier this month when during our HARDI steel conference call the wholesalers complained of reduced margins due to competitive pressures and mentioned that there were a growing number of non-traditional galvanized suppliers competing for the mechanical contractors business. During last week’s steel market review conducted by Steel Market Update (SMU), manufacturing companies […]
Every month HARDI members conduct a steel conference call to discuss what member companies are seeing regarding galvanized steel prices and demand for steel products within their regional markets. Steel Market Update, as a HARDI member company, is an active participant in these monthly calls. Over the past four weeks HARDI wholesalers have seen the […]
Steel Market Update (SMU) has received many emails from our readers as well as interested parties regarding our SMU Price Momentum Indicator which we have had at Neutral since Friday, August 23, 2013. Since that time we have seen hot rolled pricing remain in the $630-$660 per ton level (see Comparison Price Indices article below) […]
The key factor holding prices firm was the continuation of supply issues at the domestic steel mills. During the month we had ArcelorMittal Indiana Harbor lose their #3 blast furnace for a week. The furnace is back online as of the end of the month. We also had U.S. Steel performing maintenance on a furnace […]
West Chester, OH, August 28, 2013—AK Steel (NYSE: AKS) said today that members of the United Auto Workers Local 3044 have ratified a four-year labor agreement covering about 195 hourly production employees at the company’s Rockport (IN) Works. “We are pleased to have reached a competitive labor agreement at our Rockport Works ahead of the […]
Cliffs Natural Resources announced Tuesday that it has entered a nine year agreement to provide iron ore pellets to AK Steel. The new agreement runs from 2014 through 2023. Cliffs will continue to supply AK Steel under its previous agreement from now until 2014. The new agreement sets minimum and maximum volume purchases from Cliffs […]
HARDI held their monthly steel conference call earlier today. The purpose of the call is to keep the HVAC wholesalers who sell galvanized sheet and coil in touch with market conditions and trends which could impact their businesses. The consensus of opinion, based on the comments made during the conference call, is prices remain stable […]
The main issue driving steel prices during the month of July was supply and the constraints in supply related to production issues at the North American steel producers. U.S. Steel Lake Erie Works continued to be on lockout throughout July. The 2.5 million ton a year slab and hot rolled mill was first locked out […]
One of the key items watched by Steel Market Update is service center spot pricing. Service centers have the ability to support price increases or signal the market that spot increases will fail. According to the manufacturing companies participating in our mid-July steel market survey, service centers are pushing for higher prices in the spot […]
PITTSBURGH, Aug. 9, 2013 — /PRNewswire-USNewswire/ — The United Steelworkers (USW) have reached a tentative agreement on a new contract with AK Steel covering 860 workers at the steelmaker’s Ashland, Ky., facilities. The agreement, subject to ratification from the members of USW Local 1865, would be in effect for 18 months, through March 1, 2015. […]
Written by: John Packard In what might be perceived to be a positive for the domestic steel industry, the steel buyers and sellers responding to the latest SMU steel market survey believe the domestic mills have at least 30 days if not longer before the current price cycle is broken. We asked those responding to […]
Written by: John Packard SMU thought our readers might be interested in what the domestic mills are “publishing” as lead times as of Monday of this week for new orders placed at that time. We have a number of mill lead times for you to review. AK Steel has informed their customers that their Middletown […]
Written by: John Packard Steel Market Update has been conducting our twice monthly steel surveys for approximately five years now. When we started, we chose people and companies with whom we trusted and had worked with knowing we could depend on the quality of the information gathered. Having worked within the industry for over 30 […]
AK Steel said its steel shipments will be 1.27 million to 1.30 million tons in the first quarter of 2013, compared to 1.4 million tons in the fourth quarter of 2012, since the normal cycle of spot pricing increases has floundered and not resulted in higher sales. Automotive market shipments are expected to surpass fourth […]
According to the results of our most recent steel market survey, 62 percent reported “some” of the increase (less than 50% of the increase amount) has been collected. Another 5 percent reported “most” of the increase as being collect (more than 50% of the announced amount) while 33 percent reported “none” of the announced increase […]
We had a couple of readers ask how our graph would look if we used the CRU hot rolled price assessments versus our own. As you can see by the updated graph there can be some variations between CRU and SMU HRC price assessments but, essentially we follow the same track. The blue line is […]
Batting average is around .500 – Half Stick, Half Don’t Remember the good old days when the domestic steel industry would announce price increases based on the flow of business – when order flows increased to a point where mill books were strained and lead times became extended and industry prices moved higher? The “new […]
Written by: John Packard I have been involved in the flat rolled steel industry since 1977. I cannot recall another time during those 36 years in the business when the domestic steel mills have announced two significant price increases within six weeks of one another – with the target minimum base price being exactly the […]
Steel buyers are scratching their heads while steel mills begin to line up announcing identical $50 per ton price increases on all flat rolled products. AK Steel was the first to follow U.S. Steel when they put out a press release advising their customers of their intention to raise spot prices by a minimum of […]
Steel Market Update (SMU) started receiving calls by late this afternoon advising us to prepare for a new round of price increase announcements. This afternoon, United States Steel Corporation (USS) put out a letter under the signature of RY Kopf, General Manager North American Flat-Rolled Marketing, advising the various General Managers of Sales of an […]
Manufacturing companies reported service center spot prices as either stable (82 percent) or decreasing (18 percent) during our most recent SMU steel market survey. When compared to the results taken at the beginning of February we found no longer were any of the manufacturing companies reporting any attempts by the distributors to raise prices. In […]
The HARDI wholesalers who participate in the distribution of galvanized steel into the HVAC industry held their monthly conference call this morning to discuss the steel market. At the time of the last call held in late January, AK Steel had just announced a $40 per ton price increase and the HARDI members were waiting […]
Written by: Sandy Williams AK Steel reported net loss of 230.4 million for the fourth quarter 2012 compared to a net loss of 193.9 million in fourth quarter of 2011. Results include a pre-tax pension corridor charge of $157.3 million and a non-cash income tax charge of $96.4 million. Excluding these charges AK Steel […]
As we made our rounds over the past few days we found a number of the smaller mills who had not yet announced price increases and were continuing to collect orders at the previous prices. We also found a few instances of larger mills continuing to collect prices at the lower end of our scale […]
AK Steel came out with a price announcement – no surprises here. We knew they were positioning themselves to announce. The big question will be with earnings season upon us will the other mills take up the call for increases – or be satisfied with the status quo. The betting money is on the […]
Steel Market Update (SMU) participates in a monthly conference call with HARDI wholesalers who sell galvanized sheet and coil into the HVAC mechanical contractors and related industries for residential and commercial construction applications. The purpose of the call is to discuss steel trends which may impact their regional businesses – this includes domestic mill and […]
An overwhelmingly majority of manufacturers reported service center spot prices as “stable” according to the results of our survey conducted this past week. A full 85 percent of those manufacturing respondents taking our mid-January survey reported no change in spot prices from their service center suppliers. This is an increase of 18 percent compared to […]
As was reported over the past week, Steel Market Update found a number of buyers of varying sizes able to purchase hot rolled coil below $600 in the spot market. We did not find every mill or every region participating in the erosion of the bottom end of our range. What we found is the […]
As Steel Market Update (SMU) checked with various market sources after the AK Steel price announcement we found most of the industry expecting the other domestic steel mills to follow the AK Steel pricing lead. At the same time, most buyers expect the net result to be an end to the current slide in pricing […]