U.S. steelmakers operated at 81.1 percent of their capability in the week ending Jan. 26, producing 1,922,000 net tons of raw steel. It has been a year since the mills produced that much in a single week. It was also the second week this month that steel production was above 1.9 million tons. Steel production […]
Raw steel production by U.S. steelmakers in the week ending Jan. 19 totaled 1,912,000 net tons for a capability utilization of 80.7 percent. Steel production was up 1.1 percent from the prior week and up 11.5 percent from the same week last year when the utilization rate was 73.6 percent, reported the American Iron and […]
Raw steel production by U.S. steelmakers in the week ending Jan. 12 totaled 1,891,000 net tons for a capability utilization of 79.8 percent. Steel production was up 0.8 percent from the prior week and up 10.3 percent from the same week last year when the utilization rate was 73.6 percent, reported the American Iron and […]
President Trump’s border wall could be made of three million tons of U.S. steel if he is able to get the funding for construction. In a bid to make his request more palatable to Democrats, Trump said the wall could be made of domestic steel from the companies he has made great again. “I’ll have […]
U.S. mills began the new year with little sign of a slowdown. Raw steel production by U.S. steelmakers in the week ending Jan. 5 totaled 1,876,000 net tons for a capability utilization of 80.0 percent. Steel production was down a slight 1.2 percent from the prior week, but up 10.1 percent from the same week […]
Cranking out steel at more than 80 percent of capacity late in the year, U.S. mills produced over 95 million tons of raw steel in 2018, 6.2 percent more than the prior year, according to weekly production data from the American Iron and Steel Institute. The average capacity utilization rate for the year increased by […]
Total raw steel production for the month of November was 8,156,077 net tons. Broken down by production method, 5,533,449 tons (67.8 percent) were produced by electric arc furnaces (EAFs) and 2,622,628 tons (32.2 percent) were produced by blast furnaces. November production was 174,428 tons or 2.1 percent lower than October, but 836,610 tons or 11.4 […]
On Wednesday in New York, a three-judge panel on the U.S. Court of International Trade began deliberating a case that will examine the constitutionality of the Section 232 tariffs imposed by President Trump on imports of steel and aluminum in the name of national security. Opponents argue that such tariffs should be subject to congressional […]
Raw steel production by U.S. steelmakers in the week ending Dec. 15 inched up to 80.6 percent capability utilization. Steel production totaled 1,890,000 net tons for the week, up 0.7 percent from the prior week, and up 12.8 percent from the prior year, reports the American Iron and Steel Institute. Domestic mills have been running […]
Demand for long products is booming, plate products are doing OK, sheet products are flat and tubulars are cratering. This analysis by SMU staff is based on data from the American Iron and Steel Institute (AISI) and the U.S. Department of Commerce (DoC). The analysis summarizes total steel supply by product from 2003 through October […]
Steel Market Update is pleased to include the following Premium content in this Executive issue. For more information about upgrading to a Premium-level subscription, email info@SteelMarketUpdate.com. Economic indicators of U.S. manufacturing activity are strong, though growth is slowing. This report summarizes 11 data streams that describe the state of U.S. manufacturing in general and the […]
Total raw steel production for the month of October was 8,330,505 net tons, the highest production level since August 2014 when 8,546,303 tons were produced. Broken down by production method, 5,724,209 tons were produced by electric arc furnaces (EAFs) and 2,606,296 tons were produced by blast furnaces. October production was 333,505 tons or 4.2 percent […]
Raw steel production by U.S. steelmakers in the week ending Dec. 8 saw a slight dip for the third week in a row, possibly reflecting seasonal weaknesss, but stayed at the 80.0 percent capacity utilization level the mills strive to maintain. Steel production totaled 1,876,000 net tons for the week, down 0.8 percent from the […]
Raw steel production by U.S. steelmakers in the week ending Dec. 1 backslid a bit, but stayed above the 80 percent level that the mills hope to maintain. Steel production totaled 1,892,000 net tons for the week, down a slight 0.7 percent from the prior week, but up 11.1 percent from the prior year. The […]
Some government and industry leaders praised the new U.S.-Mexico-Canada Agreement that was signed by the three nations on Friday, while others remained critical of the trade pact, suggesting it was a missed opportunity to remove the Section 232 tariffs on Canada and Mexico. Incoming Speaker of the House Nancy Pelosi called the agreement a “work […]
This is the first time we have done this analysis since our April publication and we were surprised that the results for sheet and strip products weren’t as good as we expected. Our analysis is based on data from the American Iron and Steel Institute (AISI) and the U.S. Department of Commerce (DoC). The analysis […]
U.S. steelmakers have produced 5.6 percent more raw steel so far this year. Adjusted year-to-date production through Nov. 24 totaled 85,639,000 net tons. The increase is the result of a nearly 4 percent improvement in capacity utilization, to an average annual rate of 78.1 percent from 74.2 percent in 2017, reports the American Iron and […]
The North American auto industry is urging the White House to drop the Section 232 tariffs before the official signing of the U.S.-Mexico-Canada Agreement (USMCA). During testimony last week before the International Trade Commission, the Motor and Equipment Manufacturers Association, Alliance of Automobile Manufacturers and the American Automotive Policy Council asked the administration to exempt […]
The Census Bureau provides monthly data on total U.S. manufacturing inventories, shipments and new orders, as well as data for individual industries, including steel products. The Census Bureau data provides a useful reality check on data from steel industry trade groups such as the American Iron and Steel Institute and the Metals Service Center Institute. […]
Steel Market Update is sharing the following Premium-level article with its Executive-level members this issue. For more information on upgrading to a Premium subscription, email info@SteelMarketUpdate.com. Economic indicators of manufacturing activity remain strong. This report summarizes 11 data streams that describe the state of U.S. manufacturing in general and the steel industry in particular. We […]
Domestic steel mills achieved a production rate last week not seen in more than six years. U.S. raw steel production for the week ending Oct. 27 totaled 1,898,000 net tons with the mills averaging 81.0 percent of their capability, up from 80.0 percent reported the prior week, according to the American Iron and Steel Institute. […]
The American Iron and Steel Institute continues to support the Trump administration’s plan to ease vehicle fuel economy and emissions standards. In a submission to the EPA during the public comment period that ended Oct. 26, AISI expressed its support of the general direction of the proposal, which would establish a standard that balances the […]
U.S. mills have operated at 80 percent of capacity or better for two weeks in a row. U.S. raw steel production for the week ending Oct. 20 totaled 1,875,000 net tons with the mills averaging 80.0 percent of their capability, down slightly from 80.2 percent reported the prior week, according to the American Iron and […]
U.S. raw steel production for the week ending Oct. 13 totaled 1,881,000 net tons with the mills operating at 80.2 percent of capacity, reported the American Iron and Steel Institute. The current week’s production is a 1.6 percent improvement from the prior week, and a 10.3 percent jump from the same period last year, when […]
Economic indicators of manufacturing activity remain strong. This report summarizes 10 data sources that describe the state of manufacturing in the United States. We have reported on most of these separately and therefore will be brief in this summary. We don’t expect these data sources to all point in the same direction. Our intent in […]
U.S. mills have cranked out steel at a capability utilization rate of 79.0 percent or better for nine weeks in a row, but only briefly have breached the 80 percent mark. U.S. raw steel production for the week ending Oct. 6 totaled 1,851,000 net tons with the mills operating at 79.0 percent capacity, reported the American […]
The renegotiated NAFTA, now called USMCA (the U.S.-Mexico-Canada Agreement), still needs to be ratified in Mexico, the United States and Canada, but it is generating a plethora of commentary, both supportive and cautious. The new deal reached late Sunday “provides certainty to financial markets and supports investment and job creation in our country,” said incoming […]
U.S. raw steel production for the week ending Sept. 29 totaled 1,856,000 net tons, up 8.5 percent from the same period last year but down 0.4 percent from the prior week, reports the American Iron and Steel Institute. The mill capability utilization rate of 79.2 percent, up from 73.4 percent this time last year, remained […]
U.S. tariffs on steel imports appear to be having the expected effect. Two-thirds of the way through a year when the economy and steel demand are booming, imports are down by double digits. Citing preliminary Census Bureau data, the American Iron and Steel Institute reports that the United States imported 23,839,000 net tons of steel […]
U.S. raw steel production for the week ending Sept. 22 totaled 1,863,000 net tons, up 8.9 percent from the same period last year and 0.1 percent from the prior week, reports the American Iron and Steel Institute. The mill capability utilization rate of 79.5 percent, up from 73.4 percent this time last year, once again […]