U.S. consumer confidence improved further in June on top of repeated gains in each of the four previous months, according to the latest data from The Conference Board. The June index rose by 7.3 points month on month, following increases of nearly 25 points from February through May. “Consumer confidence increased in June and is currently […]
By Michael Marley The mini sheet mills face a maxi problem, namely no additional supplies of prompt industrial scrap to feed their growing appetites for that raw material. As they move ahead with planned expansions of existing facilities and the construction of greenfield plants, electric arc furnace (EAF) steelmakers may be forced to rely on additional […]
Plate prices have seen an astronomical rise, but the big gains have not been enough to keep the spread between sheet and plate from ballooning. And that spread is already the inverse of what is the norm. Normally plate prices carry a premium to sheet prices – now the reverse is true. Sheet carries around a […]
New orders, production and employment picked up in May despite slower supplier deliveries and lengthening backlogs, said the Institute for Supply Management in the May 2021 Manufacturing ISM Report on Business. The Manufacturing PMI rose 0.5 percentage point to 61.2 after contracting in April and indicates expansion for the overall economy. “Manufacturing performed well for the […]
U.S. consumer confidence saw little change in May following repeated gains since the beginning of 2021, according to the latest data from The Conference Board. The May index edged down marginally by 0.3 points month on month, following increases of more than 30 points from February through April. “After rebounding sharply in recent months, U.S. consumer […]
New home sales sank 5.9% in April from downward revised data in March to a seasonally adjusted annual rate of 863,000, according to estimates by the U.S. Census Bureau and Dept. of Housing and Urban Development. Other than a weather-related dip in February, April’s annual rate was the lowest since June 2020. A new home […]
The manufacturing sector can expect continued growth for the remainder of this year, says the Institute for Supply Management in their Spring 2021 Semiannual Economic Forecast. ISM raised its projections for several components of the survey that covers 18 manufacturing industries. “Expectations for the remainder for 2021 have strengthened somewhat compared to December 2020, as […]
The U.S. appliance industry has a chip on its shoulder when it comes to competing with automakers for the scarce supply of semiconductors. The Association of Home Appliance Manufacturing (AHAM) has joined two of its sister industry associations—the Air-Conditioning, Heating and Refrigeration Institute (AHRI) and the National Electrical Manufacturers Association (NEMA)—in appealing to the Department […]
The ISM Manufacturing Report on Business came in lower than expected in April. The PMI dipped four points to a reading of 60.7% as both the new orders and production indexes edged downward to 64.3% and 62.5%, respectively. A score above 50, however, indicates expansion, which means demand continued to improve in April. Fabricated metal […]
Home builders had a busy month in March as housing starts jumped 19.4% to a seasonally adjusted annual rate of 1.74 million. According to the report from the U.S. Department of Housing and Urban Development and the U.S. Census Bureau, starts were 37% higher than the rate one year ago. Construction started on 1.24 million […]
Cleveland-Cliffs expects historically high steel prices and record profits to continue for the balance of the year. The integrated steelmaker forecasts that U.S. hot-rolled coil prices will average $1,100 per ton for the remaining three quarters the year, according to guidance released with first quarter earnings data on Thursday, April 22. That’s 21.5% below SMU’s […]
Cleveland-Cliffs expects historically high steel prices and record profits to continue for the balance of the year. The integrated steelmaker forecasts that U.S. hot-rolled coil prices will average $1,100 per ton for the remaining three quarters the year, according to guidance released with first quarter earnings data on Thursday, April 22. That’s 21.5% below SMU’s […]
Hot-rolled coil lead times at some mills are well into June, so steel buyers have to ask themselves now whether a year-long upswing in prices is sustainable. In short, can hot-rolled coil prices continue their record run upward? First a Look Back at Where We’ve Been Steel Market Update’s average hot-rolled coil price was $1,340 […]
U.S. consumer confidence took a major leap forward in March, according to the latest data from The Conference Board. “Consumer confidence increased to its highest level since the onset of the pandemic in March 2020,” said Lynn Franco, Senior Director of Economic Indicators at The Conference Board. “Consumers’ assessment of current conditions and their short-term […]
U.S. consumer confidence saw major gains in April, according to the latest data from The Conference Board. April’s index rose by about 13.0 points month on month, following a nearly 18.6-point increase in March. “Consumer confidence has rebounded sharply over the last two months and is now at its highest level since February 2020,” said Lynn […]
Section 232 tariffs should remain in place because they backstop a stable U.S. steel industry, the benefits of which will outlast a temporary price spike, a panel of industry experts and trade union members said. “These typically last six to nine months. So we can expect that these price bubbles–and that’s really what they are–are […]
Housing starts tumbled to a six-month low in February to a seasonally adjusted annual rate of 1.421 million, according to the U.S. Department of Housing and Urban Development and the U.S. Census Bureau. Starts were 10.3% below January’s rate and down 9.3% from February 2020. Part of the decline was due to the unusual winter weather across […]
By CRU Analyst Dave Thewlis, from CRU’s Steel Long Products Monitor Prices among all types of long products rose again in April, the most challenged of which remains wire rod. February’s winter storms, which were extreme enough to cause a 2.2% m/m decline in U.S. industrial production, made a difficult situation worse for wire rod […]
General Motors continues to crank out some full-size pickup trucks despite a microchip shortage. The Detroit-based automaker is doing so by shipping certain vehicles without chip-containing components necessary for reducing fuel consumption, a company spokesman confirmed. “Due to the global shortage of semiconductors impacting the global auto industry, we are making Active Fuel Management/Dynamic Fuel […]
I am going to spend some time discussing Steel Market Update this evening. I started SMU in August 2008 as a one-man show. The company has grown over the years both in size and scope. The sale of the company to CRU has turned out to be a blessing (I think for both companies), and […]
Biden administration Commerce Secretary Gina Raimondo described Section 232 tariffs on imported steel and aluminum as “effective” on Thursday. “The data show that those tariffs have been effective,” Secretary Raimondo said in an interview with MSNBC. Raimondo’s comments are important because trade policies such as Section 232, which Trump rolled out in March 2018, fall […]
The latest manufacturing report from the Institute for Supply Management indicates a ninth consecutive month of growth for the nation’s economy. The ISM manufacturing PMI rose 2.1% to 60.8 in February with new orders and production gaining 3.7% and 2.5%, respectively. “The manufacturing economy continued its recovery in February. Survey committee members reported that their […]
The semiconductor shortage that has forced North American automakers to temporarily halt production at some assembly plants has spilled into the home appliance industry as well. The situation is severe enough that the Association of Home Appliance Manufacturers (AHAM), a lobbying group, has warned about potential re-allocations of semiconductors from that sector to others. There […]
The extreme cold snap that hit the southern U.S. disrupted production at Ternium Mexico, causing the loss of approximately 80,000 tons of production and an estimated $40 million. The facilities are now back to normal operations, but because the mill is operating at full capacity, lost production cannot be made up, said CEO Maximo Vedoya […]
The latest consumer confidence data from The Conference Board indicates that consumers remain cautiously optimistic about the economy. February consumer confidence data showed gains across most inputs; however, the survey results were gathered prior to the Texas power crisis resulting from the recent winter storm and could paint a partial picture of current sentiment. Nevertheless, there […]
President Joe Biden has signed an executive order officially implementing a U.S. supply chain review for critical products such as semiconductors – a lack of which has led to widespread automotive production outages. “Recent shortages of automotive semiconductor chips have forced slowdowns at car manufacturing plants, highlighting how shortages can hurt U.S. workers,” the White House said […]
The manufacturing sector continued to expand in January posting a PMI of 58.7 in the latest Manufacturing ISM Report on Business. The PMI slipped slightly from December’s reading of 60.5, but indicated an eighth month of expansion for the overall economy, said the Institute for Supply Management. “The manufacturing economy continued its recovery in January. […]
U.S. consumer confidence continues to fall as global pandemic fatigue sets in and genuine relief still seems far away. Despite a slight correction and stability throughout the summer months, the composite value of consumer confidence, reported by The Conference Board, has now slipped repeatedly during the fourth quarter from 101.8 in September to 88.8 in […]
Can we measure the relative importance of steel-producing versus steel-consuming industries? Last week, I looked at some ways to measure the steel industry’s importance to the economy and national defense today and in the past. Today, I explore another major point of comparison—the economic and strategic importance of steel production and steel-consuming industries economically and […]
The U.S. manufacturing sector expanded again in December, gaining 3.2 points to register a PMI of 60.7 percent in the December 2020 Manufacturing ISM Report on Business. “The manufacturing economy continued its recovery in December,” said Timothy Fiore, chairman of the Institute for Supply Management Manufacturing Business Survey Committee. “Survey Committee members reported that their […]