Through October, manufacturing has added 742,000 jobs and construction 789,000 since the pandemic-driven crash in April. The baseline against which future comparisons are made in this analysis is February 2020, the all-time high for nonfarm employment. Figure 1 shows the total number of people employed in the nonfarm economy. Table 1 is designed on rolling […]
Mills raised plate prices by an additional $40-50 per ton ($2-2.50/cwt) on Monday and Tuesday, the second increase in the past five weeks and the fourth round of increases since May. Plate prices have lagged the increases in flat rolled as plate demand is more dependent on the infrastructure, commercial construction and energy markets, which […]
By CRU Research Analyst Eduardo Tinti, from CRU’s Steelmaking Raw Materials Monitor The iron ore price rose further last week and is now approaching the $130 /dmt mark as demand from Chinese steel mills remains strong and seaborne supply declined w/w. On Tuesday, Sept. 8, CRU assessed the 62% Fe fines price at $128.0 /dmt, […]
By CRU Senior Analyst Ryan McKinley, from CRU’s Steel Metallics Monitor The CRU metallics price indicator (CRUmpi) rose by 9.9 percent m/m in September to 225.5. Rising steel demand internationally in combination with tighter markets has driven relatively large price increases in every market we assess. Market sentiment is bullish for October and, barring any […]
Steel Market Update is please to share this Premium content with Executive members. For information on upgrading to a Premium-level membership, email Info@SteelMarketUpdate.com. Nonfarm employment is improving, but made back less than half the losses seen in the two months of March and April in the four-month period from May through August. The August jobs […]
The September jobs report was released by the Bureau of Labor Statistics (BLS) on Friday and failed to meet the consensus expectation. September’s net gain was 661,000. The average monthly gain in the four months May through August was 2.7 million. In the September data, the July gain was revised up by 27,000 and August […]
The economy added 638,000 jobs in October, exceeding consensus expectations, reported the Bureau of Labor Statistics. Expectations were for a gain of 600,000. In the October data, the August gain was revised up by 4,000 and September was revised up by 15,000. Of the job losses in March and April, 10,090,000 are still unemployed. Figure […]
The Dodge Momentum Index increased for a second consecutive month, climbing 1.8 percent in August to 126.5. The commercial component of the index increased 3.3 percent while the institutional component dipped 1.2 percent lower. The index is a monthly measure of the first report for nonresidential building projects in planning, which has been shown to […]
Economic activity increased modestly in most of the U.S. in August but remained well below pre-COVID-19 levels, said the Federal Reserve in its latest Beige Book publication. “Continued uncertainty and volatility related to the pandemic, and its negative effect on consumer and business activity, was a theme echoed across the country,” said the Fed in […]
Industry sentiment, as measured by Steel Market Update, has improved to relatively healthy levels even higher than this time last year prior to the pandemic. Both the Current and Future Steel Buyers Sentiment Indexes have jumped by 20 points or more in the past month, suggesting buyers are feeling better about the market’s recovery. SMU […]
Steel prices gained momentum in August as demand improved and the mills announced a new round of price increases. As of last week, Steel Market Update’s hot rolled price average had risen to $485 per ton, up $45 in just two weeks from the mid-month low, and has since topped the $500 mark. Scrap prices were flat […]
Construction spending slid in July for both public and private nonresidential construction, says the Associated General Contractors of America in their latest analysis of government data. The decline contrasted a surge in construction spending for new homes in July. “The dichotomy between slumping nonresidential projects—both public and private—and robust homebuilding seems sure to widen as […]
By CRU Senior Analyst Erik Hedborg, from CRU’s Raw Materials Monitor The iron ore price has risen again in the past week as offloading activities have continued while demand from China’s steel mills has been robust. On Tuesday, Sept. 1, CRU has assessed the 62% Fe fines price at $124.5 /dmt, up by $1.5 /dmt […]
Six months of adversity was not what Leon Topalian expected when he took over the reigns of Nucor in January. But a pandemic that devastated the economy, caused demand and pricing to plummet and put the very lives of employees in jeopardy was a formidable challenge to overcome. “I’m not sure I’ve seen before in […]
How much has the market recovered from the depths of the pandemic? If steel prices are an indicator, we’ve made some progress. But is the bump we’ve seen in the past several weeks just a temporary blip or a sign that the upturn in steel demand is real and sustainable? Service center and OEM executives […]
The SMU Steel Summit 2020 was off to a strong start on Day 1 covering a wide variety of topics from new capacity to international trade. SMU President John Packard officially opened the conference on Monday leading a panel discussion about the steel industry in Mexico, the Middle East, Turkey and China. Ternium CEO Maximo Vedoya […]
After knocking it out of the park during the first day of our conference, we are going to shift into cruise mode as we hit on the economy and the major end-use segments affecting the industry. We have two “new” mill CEO’s joining our conference for the first time. The Nucor and U.S. Steel exec’s […]
After knocking it out of the park during the first day of our conference, we are going to shift into cruise mode as we hit on the economy and the major end-use segments affecting the industry. We have two “new” mill CEO’s joining our conference for the first time. The Nucor and U.S. Steel exec’s […]
Industry sentiment has improved in the past two weeks, as measured by Steel Market Update. SMU’s Steel Buyers Sentiment Indexes took a dip in July but rebounded in the latest check of the market for reasons that are not entirely clear. Respondents bemoan the persistent uncertainty, but business is good in certain sectors. SMU asks […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: The nation and the world saw a greater than normal number of presidential announcements in the past week. I debated Philip Bell, the president of the Steel Manufacturers Association, on issues related to Section 232 at the SMU […]
Construction employment declined in 26 states and the District of Columbia from June to July, says the Associated General Contractors of America in a new analysis of government data. “Renewed outbreaks of coronavirus in numerous states likely caused many project owners and investors to pull back on planned construction,” said AGC Chief Economist Ken Simonson. […]
China’s July crude steel output jumped 1.9 percent from June and 9.1 percent from a year ago to 93.36 million metric tons, according to the National Bureau of Statistics. Steel demand rallied after declining during the pandemic-induced shutdowns and is now benefiting from Chinese stimulus measures that include infrastructure building and housing construction. Average daily […]
For more than 28 percent of steel buyers, business is back to pre-COVID levels already, while at the other end of the spectrum 9 percent have seen little or no recovery. For the vast majority in between, the recovery process is a slow and ongoing one. In the latest market canvass this week, SMU asked: […]
Algoma Steel has been awarded a $4 million grant to upgrade its equipment to reduce greenhouse gas emissions. The funding was provided by Canada’s Low Carbon Economy Fund and will be used to improve both the tar-removal and light-oil-recovery areas of its coke-making plant in Sault Ste. Marie, Ontario. This process will not only help […]
It has been almost 12 months in the making and, due to the pandemic, one of the most carefully crafted agendas ever presented for an SMU Steel Summit Conference. Here is the final agenda for this year’s “virtual” conference. All times referenced are Eastern Time. The programs on the agenda prior to 10:00 AM are […]
It has been almost 12 months in the making and, due to the pandemic, one of the most carefully crafted agendas ever presented for an SMU Steel Summit Conference. Here is the final agenda for this year’s “virtual” conference. All times referenced are Eastern Time. The programs on the agenda prior to 10:00 AM are […]
The housing industry continued to be a boost to the economy in July. Housing starts jumped 22.6 percent in July to a seasonally adjusted annual rate of 1,496,000 from the revised June rate of 1,220,000. Compared to a year ago, housing starts were up 23.4 percent. “Demand is being supported by low interest rates and […]
North Star BlueScope, the Ohio subsidiary of Australian steelmaker BlueScope Steel Ltd., operated at over 90 percent capacity during the second half of FY 2020 despite auto demand plunging to zero during the last quarter of its fiscal year. The “ability to pivot to other end markets” kept shipment levels almost steady with the first […]
By CRU Principal Analyst Josh Spoores, from CRU’s Steel Monitor Steel markets have recovered from the depths of Covid-19 global disruption, but this has varied in pace across regions and has been stop-start in many. Indeed, as measured by CRU’s global finished steel CRUspi, finished steel prices bottomed in May at 129.3, the lowest reading […]
ArcelorMittal announce plans to build an electric arc furnace steelmaking facility at AM/NS Calvert. When completed the facility will have the capability of producing 1.5 million metric tons of steel slabs for Calvert’s hot strip mill as well as producing a wide variety of steel grades for end-users. “An electric arc furnace at Calvert makes […]