Last week, the flat rolled and plate steel mills announced price increases. Steel Market Update has seen prices rise in the mill spot markets (not in the service center spot markets) by $10 to $20 per ton. We are hearing from steel buyers (and a couple of mills) that the number of spot orders have […]
Over the last few weeks, the price of zinc has risen to over $1.41 per pound on the London Metal Exchange, and I thought it was time for an update on a series of articles I’ve written on the actual metallic cost of coating steel with zinc. To do the calculation, I use a spreadsheet […]
During the week of Aug. 14, 2017, the U.S. steel mills advised their flat rolled and steel plate customers of their intention to increase spot prices on hot rolled, cold rolled, galvanized and Galvalume steels, as well as plate. The flat rolled mills announced $30 per ton base price increases on new spot business. For […]
Zinc prices hit a 10-year high this past week, climbing to $3,000 per metric ton ($1.36 per pound) on the London Metal Exchange on Wednesday. Strong global demand and shrinking inventory boosted prices, as well as a shortage of Chinese zinc. The primary use of zinc is for the production of coated steels such as […]
Zinc prices hit a 10-year high this past week, climbing to $3,000 per metric ton ($1.36 per pound) on the London Metal Exchange on Wednesday. By Monday, zinc had risen to $1.41 per pound. Strong global demand and shrinking inventory boosted prices, as well as a shortage of Chinese zinc. The primary use of zinc […]
The three steel indexes followed by Steel Market Update reporting this past week saw prices differently. Steel Market Update, which gathered its pricing information on Monday through Wednesday of this past week, found prices to be lower on all flat rolled products and plate. Platts, on the other hand, reported hot rolled prices higher late […]
The number of U.S.-based flat rolled steel mills announcing price increases on hot rolled, cold rolled, galvanized and Galvalume has reached six. On Tuesday of this week, Nucor Sheet Mill Group became the first flat rolled steel mill to raise transaction pricing on spot flat rolled steel. The Nucor increase was for a “minimum” of […]
Flat rolled lead times, the amount of time it takes for the steel mills to produce an order if placed today, have flattened out and are essentially unchanged over the past few months, according to data collected by Steel Market Update from manufacturers and steel service centers earlier this week. On Monday, Steel Market Update […]
Steel buyers and sellers reported mills slightly more open to steel price discussions, based on responses this week from Steel Market Update’s flat rolled market trends questionnaire, possibly reflecting the seasonal slowdown in sales activity. What makes the results collected on mills willingness to negotiate pricing especially interesting is the domestic steel mills began announcing […]
Flat rolled steel prices slipped over the past week just as the domestic steel mills began to announce new price increases. Were the increases in reaction to the slippage? Were they in response to new higher scrap costs for August delivery? Most likely, it was a combination of both. We found the spread widening on […]
Four flat rolled steel mills, Nucor, NLMK USA, California Steel Industries (CSI) and ArcelorMittal USA, announced spot price increases today on all flat rolled steels produced at each mill. The Nucor Sheet Mill Group, which handles flat rolled steel products, announced a minimum of $30 per ton ($1.50/cwt) price increase on hot rolled, cold rolled […]
Based on the steel indexes followed by Steel Market Update (SMU), there were some very minor changes to hot rolled and cold rolled prices this past week, while coated products were unchanged and plate products fell. Both Platts and SMU had hot rolled falling by $5 per ton with both indexes reporting the HRC average […]
Flat rolled steel prices remained range-bound on most items for yet another week. We picked up a couple of points of weakness in coated products, but they seem to be isolated in nature. Many of the steel buyers are reporting the mills (especially Nucor) are talking up the idea of a price increase on flat […]
It is now official. According to the U.S. Department of Commerce, June 2017 foreign steel imports totaled 3,923,126 net tons and are at the highest levels seen since January 2015, prior to the antidumping (AD) and countervailing duties (CVD) trade suits being filed. Approximately one-quarter of the imports were semi-finished steels (mostly slabs) with the […]
Flat rolled and plate steel prices were essentially flat this past week as both Steel Market Update and Platts saw hot rolled, cold rolled, galvanized and Galvalume steel prices remaining the same as the previous week. With Section 232 being put on the back burner, the flood of foreign steel imports (prompted by the original […]
Responses to two questions in Steel Market Update’s latest flat roll market trends analysis elicited a clear consensus from our participants: The Trump administration’s delay in acting on Section 232 could open the door to more foreign steel imports. But the government should not necessarily penalize foreign countries just because they export a high rate […]
Flat rolled lead times have seen little change in the past month. Twice per month, Steel Market Update conducts an analysis of the flat rolled sheet and plate markets based on responses to a comprehensive questionnaire. When looking at lead times, the analysis is restricted to responses from manufacturers and distributors, who accounted for 84 […]
Over the course of this week, Steel Market Update has been canvassing active participants in the flat rolled steel markets as we try to capture any changes in market trends. The more than 100 respondents we had this week provided us a snapshot on how steel mills are handling price negotiations. As a group, respondents […]
Total imports of rolled steel increased by 16.9 percent, and sheet products by 18.4 percent, in the three months through July, compared with the prior three months, according to final license data for July released by the U.S. Commerce Department on Aug. 1. The three-month moving average (3MMA) of the total volume of rolled product […]
Steel Market Update has seen a bit of a yo-yo effect to flat rolled and plate steel prices over the past few weeks. Since the word got out that the Section 232 decision would not be announced any time soon, the market has taken a step back to evaluate where prices will go from here. […]
Written by: John Packard, Founder, Steel Market Update Steel Market Update was incorporated and began selling subscriptions (memberships) of just our steel newsletter during August 2008. Today, we are celebrating our ninth birthday. I want to take a moment to thank our members and those who participate in our conference and workshops. I want to […]
Written by: John Packard, Founder, Steel Market Update Steel Market Update was incorporated and began selling subscriptions (memberships) of just our steel newsletter during August 2008. Today, we are celebrating our ninth birthday. I want to take a moment to thank our members and those who participate in our conference and workshops. I want to […]
Flat rolled steel price averages rose on all three indexes followed by Steel Market Update (SMU) this past week. Hot rolled has become the “hottest” product recently, according to steel buyers contacted by SMU during the week. Benchmark HRC rose to $625 per ton on Platts, as well as our own index. SteelBenchmarker, which only […]
Foreign steel imports continue to trend well over the 3.0 million net tons mark as steel buyers placed heavy tonnage once the Section 232 investigation was announced in March (March orders = June/July delivery). The U.S. Department of Commerce (DOC) released preliminary census for June and license data for July earlier this evening. According to […]
Steel buyers reported the domestic steel mills as being somewhat more receptive to moving prices early this week compared to where they were at the end of this past week. The result being we did see prices rising on all sheet products. One mill told us earlier today about their coated products order book, “Hanging […]
The week ending July 21 was another mixed week for flat rolled steel and plate prices. Steel Market Update (SMU) steel price indices saw two products as being higher, two lower and one unchanged. Platts had two higher and one lower. SteelBenchmarker did not report prices this week as they only report twice per month. […]
The U.S. Department of Commerce (DOC) released new foreign steel import license data on July 18. The trend for July is for steel imports to remain quite high, in the mid 3-million-net-ton range. We expect imports to be lower than June’s 3.9 million net tons, but above the 12-month and 3-month moving averages. Finished steel […]
Flat rolled lead times remain flat compared to what we reported for early July, as well as one month ago. Twice per month, Steel Market Update conducts an analysis of the flat rolled sheet and plate markets. This is done through the use of a comprehensive questionnaire focused on manufacturing companies and service centers, which […]
Despite the risks associated with Section 232 and the belief that flat rolled steel prices will rise prior to and immediately after the announcement of a Section 232 decision, mills appear somewhat more open to price discussions. Based on the responses received this week from our flat rolled market trends questionnaire, buyers and sellers of […]
As the steel industry waits for clarity on Section 232 we got another week where flat rolled steel prices came in with mixed results. We saw some of the items indexed have their averages rise while others fell. In reality it doesn’t appear that there is a lot pushing prices in one direction or another […]