Flat rolled steel prices were essentially unchanged on the Platts and SMU indexes while SteelBenchmarker, which only produces their indices twice per month, played catch up. The three steel indexes agreed that benchmark hot rolled coil was averaging $630 per ton ($629 was the average of the three indexes) or $31.50/cwt. Cold rolled was unchanged […]
January foreign steel import license data released by the U.S. Department of Commerce earlier this week is suggesting total steel imports will be in line with November and December at approximately 2.8 million net tons. We continue to see a drop in the level of hot-rolled tons coming into the U.S. market as fewer countries […]
The market did not collapse after our article about potential cracks in hot rolled. In fact, the hot rolled prices actual increased by $5 per ton while the other items remained intact at last week’s levels. Although SMU did collect data on hot rolled that was lower than the week prior, the lower offers were […]
SMU Price Momentum Indicator has been pointing to Higher flat rolled steel prices since late October (12 weeks). Based on our analysis of last week’s steel market trends survey as well as direct contact with buyers today, SMU Price Momentum has not changed and our expectation is for prices to move higher over the next […]
Are cracks starting to develop in the floor of steel prices? Are any cracks a harbinger to a reversal of flat rolled steel prices? It is too early to tell. However, buyers and sellers of steel need to be aware of that the markets may be in the early stage of change. Since the beginning […]
Only two of the steel indexes followed by Steel Market Update reported prices this past week (SteelBenchmarker only reports twice per month). We saw mixed results with Platts taking their hot rolled average to $630 per ton (up $20) while our SMU HRC index average was up $5 per ton to $625 per ton. Platts […]
Steel mill lead times, the amount of time it takes for steel mills to produce new orders of hot rolled, cold rolled, galvanized or Galvalume products, continue to remain extended according to the results of Steel Market Update flat rolled steel market trends analysis conducted during the course of this week. Hot rolled lead times […]
Flat rolled steel buyers reported the domestic steel mills as not willing to negotiate prices on flat rolled steel products. This is a continuation of the position we reported beginning in November after the initial flat rolled steel price increase announcements being made in late October. Only 17 percent of the respondents to our flat […]
Flat rolled steel prices continued their march higher this week in reaction to the latest price announcements made by the U.S. steel mills earlier this month. Where steel prices go from here will depend on lead times, the domestic mill order books and how much inventory is available. We will have a glimpse at each […]
Late today the U.S. Department of Commerce released updated foreign steel import license data for the months of December and January. Since we are now half way through the month our interest is mainly with the month of January as we are trying to determine if there is any pull-back in flat rolled steel tonnages. […]
Flat rolled steel and plate prices continued their march higher this past week based on the steel price indexes followed by Steel Market Update. Benchmark hot rolled coil (HRC) which is the base thickness prior to extras being added, is working its way toward the latest “minimums” set out by ArcelorMittal in their recent price […]
The U.S. Department of Commerce (DOC) has released Final Census numbers on foreign steel imported into the United States through November 2016 and has updated license data for the month of December 2016. This provides us with our first look at imports for the year so we can do a comparison against 2015 to see […]
OK, don’t get freaked out (yet) as the new flat rolled steel base price increases aren’t really impacting the numbers for this week. However, there were a couple of steel mills already seeking higher hot rolled, cold rolled and coated prices prior to the announcement. We did collect some of that data in tonight’s steel […]
There was very little movement in flat rolled steel prices according to the Platts and Steel Market Update steel indexes. This is expected to change as we move into the second week of the New Year as AK Steel announced a new $40 per ton price increase on Friday. Benchmark hot rolled is being reported […]
Flat rolled lead times remained essentially unchanged from what we reported during the middle of December. Steel mill order books appear to be “good” without creating excessive anxiety at their customers. At the moment, we will call lead times as being not too short and not too long but, just about right… Since early Tuesday […]
Steel mills continue to feel comfortable when negotiating with their customers. We found that only one quarter of the steel buyers responding to our survey for this week reported the mills as willing to discuss the possibility of adjusting (lowering) steel spot prices. We found this to be consistent across all flat rolled products: hot […]
Licensed data for December was reported by the Steel Import Monitoring System of the US Commerce Department on January 3rd. An explanation of the methodology that use at SMU to analyze the trade data is given at the end of this piece. All volumes in this analysis are reported in short tons. In December, on […]
The engines are warming up and the expectation is for a better 2017 than 2016. The data we collected today was not significantly different than what we were seeing one week ago. Many mills are telling their customers they are on an “inquire only” basis when it comes to new spot orders. We are also […]
When we ended 2015 benchmark hot rolled base prices averaged $375 per ton ($18.75/cwt), cold rolled base average was $515 per ton ($25.75/cwt) and the spread between HRC and CRC base prices was $140 per ton ($7.00/cwt). Galvanized base prices averaged $510 per ton ($25.50/cwt) and the spread between HRC base and that of Galvanized […]
We ended 2016 with a semblance of agreement as to where flat rolled steel prices stood. The table below is for last week and does not include price adjustments that may have been made this week. Hot rolled prices now average more than $600 per ton with SMU at $610 per ton and SteelBenchmarker $608 […]
The data collected late last week and through the day today was spotty at best. However, we feel confident from the numbers we were able to collect to make some minor adjustments in our hot rolled and cold rolled indices. With the Holiday Week upon us SMU does not anticipate another round of price increases […]
Based on the results of the Steel Market Update flat rolled steel market trends analysis performed prior to the Holiday weekend steel mill lead times continue to be extended. The respondents to our survey reported on the amount of time it takes to get hot rolled, cold rolled, galvanized and Galvalume produced from the time […]
There was little movement in the positions of the domestic steel makers when it came to their willingness to negotiate spot flat rolled steel prices this past week. Respondents to our final flat rolled steel market trends survey reported the steel mills as taking strong stances when it came to negotiating spot pricing on hot […]
The following Comparison Price Indices (CPI) is analyzing prices supplied to the steel industry for the week ending December 23rd and does not include price changes from this week. At the end of this past week both Platts and Steel Market Update had hot rolled prices as averaging $595 per ton ($29.75/cwt). SteelBenchmarker did not […]
Earlier this week the U.S. Department of Commerce released new license data on foreign steel imports into the United States for the months of November and December. At this time both months appear poised to come in just under 3.0 million net tons. We are seeing some changes in the trends regarding various products. For […]
When it comes to coated steels (galvanized and Galvalume) the domestic steel mills are beginning to collect prices above the “minimum” guidance number of $820 per ton ($41.00/cwt). We are seeing some of the mills, including some of the smaller conversion mills, collecting as much as $840 per ton base pricing plus extras ($42.00/cwt). Hot […]
A note about the MSCI data and carbon flat rolled inventories. The MSCI reported hot rolled supplies on the floor of the U.S. steel mills as being 2.21 months supply. Cold rolled and coated supplies were under 2.0 months based on MSCI statistics. Cold rolled was reported to be 1.90 months supply and coated at […]
Flat rolled prices continued their march toward $600 per ton hot rolled ($30.00/cwt) and $820 per ton base prices on cold rolled and coated ($41.00/cwt). Based on the steel indices followed by Steel Market Update (SMU), hot rolled, cold rolled and coated all increased their averages compared to one week earlier. SteelBenchmarker did report prices […]
US Steel announced today that it will begin processing slabs on the currently idled hot strip mill at Granite City Works in Granite City, Ill., in mid-February 2017. The slabs for the mill will be sourced from US Steel’s own domestic facilities. US Steel said in a press release that it is making the adjustment […]
Flat rolled prices rose again this week according to Steel Market Update sources. Our hot rolled, cold rolled, galvanized and Galvalume indices increased by $10 to $20 per ton and are very close to maximizing the increase announcements made two weeks ago. At that time the target was clearly set for $600 per ton hot […]