Domestic mill lead times: the amount of time it takes to receive flat rolled steel on an order placed this week, continue to be extended and are averaging at least one week longer than one year ago according to those participating in this week’s SMU flat rolled market trends analysis. Earlier this week we began […]
Steel Market Update asks our flat rolled steel market trends analysis participants to comment on the status of negotiations between their company and their steel mill suppliers. We want to know how stringent are the mills being when it comes to collecting the announced or original quoted steel price and are they able to collect […]
In an email to their customers earlier today, ArcelorMittal USA became the first mill to announce new base price minimums on flat rolled steel with the opening of their July order book. The new steel price minimums set by AM are as follows: Hot Rolled = $610 per ton ($30.50/cwt)Cold Rolled = $800 per ton […]
In case there is some confusion, flat rolled steel prices are moving higher and, with today’s announcement by ArcelorMittal it is only a matter of time before benchmark hot rolled breaches $600 per ton and cold rolled and coated breach $800 per ton (base plus extras). It has been a very difficult market to gauge […]
Double digit flat rolled steel price moves seem to be a weekly occurrence over the past few weeks. Steel mills are controlling their flat rolled steel order books and restricting spot tons. Those buyers who did not recognize things were changing back in the fall when Steel Market Update began pointing out the changes in […]
What makes indexing flat rolled steel prices so difficult right now is you have steel mills quoting lead times that may be in May, June or even July for the same product. A hot rolled order placed on SDI last week is actually being produced at the same time as one placed on AK Steel […]
Earlier today CSN began informing their U.S. customers importing flat rolled steel from them that there has been an accident at their #3 blast furnace in Brazil. The blast furnace, which was just coming back into operation after a 10-day scheduled maintenance outage, will now be down for an “undetermined” amount of time. SMU sources […]
According to our latest flat rolled steel market survey which was conducted last week, steel mill lead times have continued to move out on every single one of the flat rolled products. The extended mill lead times are one of the primary reasons behind the increases in flat rolled steel prices, pressure on deliveries, allocations […]
The steel indexes followed by Steel Market Update showed flat rolled steel spot prices continuing their climb higher as all products moved by double digits. Both Platts and SMU took hot rolled prices up by $15 per ton, although there is a $15 per ton spread between the two indexes. Based on the SMU index, […]
Steel prices continued to rise over the past week. A number of buyers are reporting mills as being on allocation (or not open at this time) which is keeping prices very close to the announced levels made over the past two weeks. In some cases, buyers are reporting mills as asking for premiums above the […]
The following is a quick update on the status of the flat rolled trade cases (hot rolled, cold rolled and corrosion resistant) and what are the next important dates to remember. The corrosion resistant, which covers galvanized, Galvalume and related products such as galvanneal and aluminized, are scheduled to have the Final Determination by the […]
All of the steel indexes we follow reported flat rolled steel prices this past week with each showing major double digit gains for the domestic steel mills hot rolled, cold rolled, galvanized, Galvalume and plate. Hot rolled prices surged with each index reporting at least a $34 per ton increase (+$35 for Platts and +$40 […]
Mill Steel Company, one of the nation’s largest distributors of flat-rolled carbon steel, announced the appointment of Pam Heglund to President. Heglund will be the first female president of a steel service center of this size. Heglund was Mill Steel’s first intern, starting at the company in 2000 and serving the past five years as […]
This was one of the most difficult weeks to analyze flat rolled steel prices due to a number of factors. There were some “deals” available a few days ago (but after last Tuesday when we last indexed pricing) that no longer exist. How much weight do we give those deals? There are a number of […]
Licensed data for March was reported by the Steel Import Monitoring System of the US Commerce Department on April 5th. An explanation of the methodology that we at SMU use to analyze the trade data is given at the end of this piece. Total rolled product licensed imports in the single month of March were […]
This report summarizes total steel supply from 2003 through February 2016 and year on year changes. It then compares domestic mill shipments and total supply to the market. It quantifies market direction by product and enables a side by side comparison of the degree to which imports have absorbed demand. Sources are the American Iron and […]
Steel buyers were pulling out their hair earlier today due to the number of mills holding tons off the market as they try to determine what the new pricing should be on hot rolled, cold rolled, galvanized and Galvalume products. As of early this afternoon (Thursday) steel buyers were informing Steel Market Update of a […]
Steel mill lead times on all four flat rolled products have become more extended, according to those who responded to our most recent flat rolled steel market analysis. As lead times extend, steel buyers have to place more orders in order to protect their inventories. The more orders placed, the better chance for the domestic […]
Flat rolled prices continue to tighten and lead times continue to be extended, based on our analysis of the flat rolled steel markets and pricing this week. Buyers are reporting a shrinking of the range of offers available out there. So, even though we have a range of $440-$460 per ton on hot rolled, we […]
NLMK USA was the first mill to raise prices, going up $40 per ton. I am hearing comments from both sides on whether the price increases are a good or bad thing. My personal opinion is prices got a little “over-done” last year and dropped too low. A hot rolled number closer to $500 may […]
According to ArcelorMittal USA comments made during the Association of Steel Distributors meeting over the weekend which SMU attended, a trade case on steel plate imports will be filed within the next few weeks. ArcelorMittal along with Nucor and SSAB have been working on the documentation for an extended period of time and our understanding […]
Flat rolled steel prices continue to climb and there is quite a range out there when looking at the various indices. It is SMU opinion that the variances are due to collection techniques and the amount of data available to any specific index at the time they produce their numbers. SMU and Platts take into […]
March saw flat rolled steel prices rising throughout the month. SMU benchmark hot rolled average for the month was $427 per ton. This was slightly lower than Platts which revised their HRC number on the 30th which took their average up to $432 per ton. Both Platts and SMU monthly averages were higher than the […]
Flat rolled steel prices continue to firm and many buyers are convinced there could be more price increases to come with a tightening foreign market and higher offers for foreign steel coupled with the expectation that ferrous scrap prices will increase by a minimum of $30 per gross ton for April delivery. SMU has been […]
Due to the Easter Holiday we did not publish our Comparison Price Indices article over the weekend. However, you didn’t miss anything as here is what we are seeing for hot rolled, cold rolled, coated products and plate from the indexes we followed this past week. Last week hot rolled moved higher by $10 per […]
Flat rolled steel pricing momentum is clearly on the side of the domestic steel mills. You have a number of the integrated mills essentially out of the spot markets and lead times are extended. Even hot rolled lead times are moving out despite weakness in the energy markets. SMU Price Momentum Indicator continues to point […]
Flat rolled steel buyers are telling Steel Market Update that the domestic mills are getting more aggressive about collecting all, or at least a portion of the latest price increase. Hot rolled continues to be the weakest product, but even in HRC we are seeing the numbers starting to move and we expect them to […]
AK Steel followed the rest of the steel mills as they announced a $30 per ton price increase just 17 days after announcing their last flat rolled increase. This is the third price increase out of AK Steel so far this year. With the latest round of increases, AK Steel minimum base price levels are: […]
Flat rolled steel prices continue their march higher this past week. At least that is what our index is telling us. However, when we look at other indexes we do not always get the same picture. There seems to be a split in the numbers with some indexes showing benchmark hot rolled averaging $414 per […]
The following article was written by SMU founder and publisher, John Packard with the assistance of Platts Content Director, Metals Americas, Joseph Innace. Shortly after Steel Market Update (SMU) became a real company I understood the need for the flat rolled steel industry to have an pricing index which was independent and not tied as […]