Steel Market Update’s check of the market this week shows another small decrease for hot rolled steel prices. The hot rolled price has dipped three of the last four weeks by a total of $45 from the high of $1,955 per ton in the first week of September. SMU is changing its Hot Rolled Price […]
Steel Dynamics Inc. (SDI) posted yet another new quarterly profit record on record-high flat-rolled steel prices. And the Fort Wayne, Ind.-based electric arc furnace (EAF) steelmaker thinks that the record times could roll into the fourth quarter as well. “Domestic steel demand remains solid in our automotive, construction, and industrial end markets. We believe this […]
Mill lead times for orders of flat rolled and plate products have shortened significantly over the past month. Steel Market Update’s latest check of the market shows the average lead times for hot rolled, cold rolled and galvanized steel have come in by roughly three-fourths of a week. The typical hot rolled lead time is […]
Since this time last year, mills have been in the driver’s seat when it comes to steel price negotiations. With demand exceeding supplies – and with buyers more concerned about finding steel than what they had to pay for it – mills have basically been able to steer prices wherever they wanted. That appears to be changing, […]
Flat rolled and plate steel prices were flat to down slightly this week with the exception of a small increase in cold rolled, according to Steel Market Update’s check of the market on Monday and Tuesday. The small ups and downs in steel prices over the past month are in line with most buyers’ expectations […]
Flat rolled steel prices are in transition, which tends to lead toward more volatility and wider price ranges in Steel Market Update data. One of the issues we face when we reach an inflection point in the spot market is the lack of daily transactions. With service center inventories nearing a state of balance, combined […]
Editor’s note: SMU Contributor David Feldstein is president of Rock Trading Advisors. Rock provides customers attached to the steel industry with commodity price risk management services and market intelligence. RTA is registered with the National Futures Association as a Commodity Trade Advisor. David has over 20 years of professional trading experience and has been active […]
Mill lead times for flat rolled and plate products have gradually been shortening over the past two months. Steel Market Update’s check of the market this week shows the average lead time for hot rolled down to nearly eight weeks from more than ten weeks in early August. Lead times for cold rolled and galvanized […]
It’s beginning to look like hot rolled steel prices will fall short of the $2,000 per ton ($100 per cwt) mark that many believed would be the peak. Steel Market Update’s check of the market on Monday and Tuesday shows the average hot rolled price decreasing for the third time in as many weeks to $1,920 […]
The average hot rolled steel price saw another small dip, based on Steel Market Update’s check of the market this week, but cold rolled and galvanized continued to rise, as the market reacts unevenly to changing conditions. On the supply side, sources report better availability of spot tons from the domestic mills at the same […]
If you feel a chill in the air, it’s not just the first day of fall and cooler weather coming. We’ve noticed a cooling in market conditions – and it’s backed up by our survey results (which are colorful like fall leaves). Let’s not talk about prices, at least not directly. Let’s talk about lead times, […]
Prices for four of the seven steelmaking raw materials tracked in this SMU analysis decreased over the last 30 days. Through Sept. 17, iron ore prices stumbled 21% in one month’s time, busheling scrap prices declined 12%, pig iron prices fell 11%, and shredded scrap prices declined 3%. Coking coal prices jumped 49% in that […]
Lead times for spot orders of flat rolled and plate products from the mills have all seen notable declines this month, with the exception of Galvalume, according to Steel Market Update’s check of the market this week. The average lead time for hot rolled is now less than nine weeks, down from more than ten […]
Sheet prices continue to wobble with hot-rolled coiled prices actually declining, albeit modestly, for the first time in more than a year. The concern: that the market is at a peak – and perhaps heading down the other side. Hot rolled coil prices have been flat in prior weeks, but they have not declined since […]
Market momentum suggests that flat rolled steel prices are likely to continue moving up, at least in the short term, as hot rolled hit a new record high once again this week at an average of $1,955 per ton, up $20 over last week, according to SMU’s check of the market on Monday and Tuesday. […]
Prices for four of the seven steelmaking raw materials tracked in this SMU analysis decreased over the last 30 days. Through Sept. 1st, iron ore prices stumbled 18% in one month’s time, pig iron prices fell 11%, shredded scrap prices declined 4%, and zinc prices decreased 2%. Busheling scrap prices remained flat month over month, while aluminum prices rose […]
In mid-August, when lead times registered their first significant decline of the year, some interpreted it as a sign the pendulum had finally begun to swing the other way. Lead times have long been expected to shorten as the mills’ ability to supply the market finally catches up with demand. But any predictions of a […]
Flat-rolled steel prices are again mixed. Hot rolled is up $20 per ton, cold rolled is unchanged, and coated products are down $20-25 per ton. (Plate – following mill price hike announcements – is up a sharp $105 per ton.) The mixed signals are not a sure sign of the market inflecting. And Hurricane Ida […]
We often talk a lot about hot-rolled coil prices in Final Thoughts. I’d like to take a deeper dive into coated prices today. It’s been an almost straight line up for an entire year for flat-rolled steel prices. And galvanized is no exception. Galvanized base prices are at $2,070 per ton ($103.50 per cwt). That’s […]
Ternium Mexico continues to ramp up its new hot strip mill outside of Monterrey while also eyeing potential expansions on both sides of the Rio Grande, the company’s top executive said. “We still have a lot of things to do in Mexico. But also in the States, our facility is running at 100% capacity – so we […]
With the exception of coated products, lead times for delivery of flat rolled and plate steel have shortened by a week or more – the first significant decline this year and a possible sign that rising steel prices are losing momentum. Lead times for spot orders of steel have extended continuously since the market bottomed last […]
Flat rolled and plate steel prices were flat to up modestly this week as the year-long uptrend appears to be flattening somewhat. Hot rolled hit yet another historical high mark at $1,915 per ton, according to Steel Market Update’s check of the market this week, up another $15. It’s too soon to tell if prices […]
The average spot market price for hot rolled coil reached a notable new benchmark this week at $1,900 per ton, according to Steel Market Update’s check of the market on Monday and Tuesday. That’s an astounding 78% higher than the previous record of $1,070 per ton seen in the summer of 2008. Prices for flat […]
Steel Market Update’s check of the market this week shows no significant change in lead times for deliveries of spot orders from the mills. Average lead times for hot rolled orders remain above 10 weeks, while those for cold rolled and coated products are still above 12 weeks – at least twice as long as […]
Steel prices have moved steadily and predictably upward week after week for the past year. But Steel Market Update’s check of the market on Monday and Tuesday delivered some mixed signals for the first time since August of 2020. Hot rolled coil prices moved up again by another $30 per ton, falling just short of […]
Steel prices have moved steadily and predictably upward week after week for the past year. But Steel Market Update’s check of the market on Monday and Tuesday delivered some mixed signals for the first time since August of 2020. Hot rolled coil prices moved up again by another $30 per ton, falling just short of […]
Prices for four of the seven steelmaking raw materials tracked in this SMU analysis increased from June to July, with all products following large gains in previous months. Over the last 30 days, coking coal prices increased 16% and busheling scrap prices rose 5%. Zinc and aluminum prices increased less than 1%, while shredded scrap remained flat and pig […]
Spot tons of flat rolled steel are still in short supply, report respondents to Steel Market Update’s check of the market this week. Any tons that are available command a rising premium. Flat rolled prices increased by another $10-40 per ton, with some reporting hot rolled offers as high as $1,900, though HRC saw a […]
Steel Market Update’s check of the market this week shows that lead times for deliveries of spot orders from the mills have shortened slightly on all flat rolled products. The dip of a half-week or less is not highly significant, however, as average lead times for hot rolled orders remain above 10 weeks, while those […]
Flat-rolled steel prices continue to shoot upward – with no signs of the summer doldrums, the chip shortage or fears of a correction blunting their momentum. U.S hot-rolled rolled coil prices now stand at $1,850 per ton ($92.50 per cwt), up $30 per ton from a week ago. Cold-rolled coil and galvanized base prices notched similar […]