Nucor’s Plate Group announced a new minimum base price yesterday “to provide an increased level of clarity and transparency to our plate product pricing.” The company added: “This price change reflects continued increases in input costs and changing market dynamics.” Effective immediately, Nucor’s new minimum base price is $29.50/cwt ($590 per net ton), freight included. […]
Mills raised plate prices by an additional $40-50 per ton ($2-2.50/cwt) on Monday and Tuesday, the second increase in the past five weeks and the fourth round of increases since May. Plate prices have lagged the increases in flat rolled as plate demand is more dependent on the infrastructure, commercial construction and energy markets, which […]
Last Thursday, USS-POSCO notified customers of a revision to its galvanized steel coating extras. UPI advised customers the new extras will apply on all new orders effective immediately. UPI is the fifth mill to revise its galvanized coating extras recently, following Steel Dynamics, California Steel Industries, Nucor and U.S. Steel. SMU has done an analysis […]
On Wednesday, U.S. Steel notified customers of a revision to its galvanized and galvannealed steel coating extras. USS advised customers, “The cost to procure zinc for our Hot Dipped Galvanized products has increased significantly in recent weeks, with the average LME zinc price now above the current coating weight tables that we put in place […]
Six months of adversity was not what Leon Topalian expected when he took over the reigns of Nucor in January. But a pandemic that devastated the economy, caused demand and pricing to plummet and put the very lives of employees in jeopardy was a formidable challenge to overcome. “I’m not sure I’ve seen before in […]
Last Friday, Nucor notified customers of a revision to its galvanized coating extras. Nucor advised customers, “Consistent with our practice to monitor the cost of zinc, we have revised our galvanized coating weight extras effective with new orders acknowledged for the week ending Oct. 10, 2020.” Nucor is the third mill to revise its galvanized […]
Following on a similar move by the plate mills earlier in the week, flat rolled mills announced price changes Wednesday and Thursday ranging from $40 to $60 per ton. Nucor’s Sheet Mill Group notified customers today, Aug. 27, that it has increased base prices on new orders of hot rolled, cold rolled and galvanized steel […]
Many steel buyers have been anticipating a price increase, and the plate mills were the first to make a move. ArcelorMittal USA, Nucor and SSAB all announced changes to their plate prices, but not in the typical lock-step fashion. Nucor informed customers on Friday that it was setting a minimum base price of $28/cwt ($560 […]
After knocking it out of the park during the first day of our conference, we are going to shift into cruise mode as we hit on the economy and the major end-use segments affecting the industry. We have two “new” mill CEO’s joining our conference for the first time. The Nucor and U.S. Steel exec’s […]
After knocking it out of the park during the first day of our conference, we are going to shift into cruise mode as we hit on the economy and the major end-use segments affecting the industry. We have two “new” mill CEO’s joining our conference for the first time. The Nucor and U.S. Steel exec’s […]
Welcome from SMU Virtual Steel Summit Conference control central in Hobe Sound, Fla. It’s sunny, temperatures are in the mid-90’s and my home looks nothing like a typical Florida residence as a team of production and audio/visual experts assist in the creation this year’s virtual event. Putting on a conference as large as ours has […]
It has been almost 12 months in the making and, due to the pandemic, one of the most carefully crafted agendas ever presented for an SMU Steel Summit Conference. Here is the final agenda for this year’s “virtual” conference. All times referenced are Eastern Time. The programs on the agenda prior to 10:00 AM are […]
It has been almost 12 months in the making and, due to the pandemic, one of the most carefully crafted agendas ever presented for an SMU Steel Summit Conference. Here is the final agenda for this year’s “virtual” conference. All times referenced are Eastern Time. The programs on the agenda prior to 10:00 AM are […]
We have passed through 700 registered attendees for this year’s SMU Virtual Steel Summit Conference. Activity has been high and we are confident we will reach our 800+ registered attendee goal. We will be the largest steel conference (live or virtual) in North America this calendar year. Those who have seen our platform are excited. […]
We have passed through 700 registered attendees for this year’s SMU Virtual Steel Summit Conference. Activity has been high and we are confident we will reach our 800+ registered attendee goal. We will be the largest steel conference (live or virtual) in North America this calendar year. Those who have seen our platform are excited. […]
Four days to go… This will be our 10th SMU Steel Summit Conference. Over those 10 years the SMU team (and now CRU team) has built the most successful steel conference outside of mainland China. This year’s conference will be either the second or third most attended event we have had since the beginning. I don’t think we […]
A new Danieli spooler line is in operation at the Nucor Steel Sedalia minimill in Missouri. The spool will deliver twist-free compact and regularly shaped coils at up to 30 m/s. The high-efficiency and low-cost line is for the production of rebars and rounds in coils weighing up to five tons. The spooler line consists of […]
Last week we conducted one of our flat rolled and plate steel market trends analyses. Some of the information gathered was shared in Thursday’s and again in tonight’s issue (see above). However, we share in our newsletter only a small fraction of the information that is being collected. Our data providers and Premium members can […]
There are now 14 Days to go before the start of this year’s steel conference. Unlike past years we will not be in Atlanta but instead holding the conference as a virtual event. You can learn more about what that means by reviewing a recording we did a couple of weeks ago when we unveiled […]
A challenge by JSW Steel USA to the U.S. Court of International Trade regarding the denial by Commerce of its slab exclusion requests has prompted CIT to order Commerce to provide further explanation of the steps taken in the denial process. “Remand of all twelve exclusion requests is warranted because Commerce’s denials are devoid of […]
In the SMU Community Chat webinar last week, Paul Terry of CRU and John Packard of Steel Market Update gave a live demo of the virtual event platform that will be the SMU Steel Summit 2020 Virtual Conference. If you missed the webinar, you can watch the live demo here. We explain networking, agenda, exhibition and […]
In the SMU Community Chat webinar last week, Paul Terry of CRU and John Packard of Steel Market Update gave a live demo of the virtual event platform that will be the SMU Steel Summit 2020 Virtual Conference. If you missed the webinar, you can watch the live demo here. We explain networking, agenda, exhibition and […]
Cleveland-Cliffs is getting back to normal after idling 15 facilities in three months due to the impacts of COVID-19. As of today, all facilities, including the AK Steel Dearborn furnace, are back to operation with the exception of North Shore and Tilden, which will resume next week. Idling costs of around $50 million will be […]
Nucor President and CEO Leon Topalian has had quite the year, taking the reins of Nucor in January and then steering the company through the COVID-19 pandemic. Unlike Nucor’s blast furnace competitors, the EAF-based steelmaker was able to continue operations relatively unabated during the past two quarters. “Our ability to continue operating, along with proactive […]
Nucor President and CEO Leon Topalian has had quite the year, taking the reins of Nucor in January and then steering the company through the COVID-19 pandemic. Unlike Nucor’s blast furnace competitors, the EAF-based steelmaker was able to continue operations relatively unabated during the past two quarters. “Our ability to continue operating, along with proactive […]
Watch the market closely. I am hearing rumors that at least one EAF mill is trying to get flat rolled numbers up. Right now, most (not all) data providers were not supportive of higher numbers. I am hearing integrated mills are not booking a lot of spot business, and thus are able to get slightly […]
SMU Virtual Steel Summit Conference now has less than a month to go… (25 days). The SMU platform from which the conference will be hosted will be unveiled in a free webinar at 11 AM ET this morning. We added a couple new speakers to the 2020 SMU Virtual Steel Summit Conference. I added Big […]
Here is a listing of the companies registered for the SMU Steel Summit 2020 Virtual Conference as of last week. Note that those companies with an * after their name means more than one person is attending. If your company is missing, or if you have questions about your registration, please contact Events@SteelMarketUpdate.com. You can […]
Here is a listing of the companies registered for the SMU Steel Summit 2020 Virtual Conference as of last week. Note that those companies with an * after their name means more than one person is attending. If your company is missing, or if you have questions about your registration, please contact Events@SteelMarketUpdate.com. You can […]
Lead times for spot orders of flat rolled and plate steel have seen relatively little change over the past month, but remain about a half week shorter than this time last year as the market tries to come to grips with doing business in a pandemic. Lead times are an indicator of steel demand—shorter lead […]