Steel Market Update conducted one of our flat rolled steel market surveys this past week. One of the key questions asked during the survey process is regarding the willingness of the domestic flat rolled steel mills to negotiate spot pricing. In last week’s survey our respondents reported a jump in the percentage reporting the steel […]
The U.S. Department of Commerce released final census data for July steel imports this past week. Total imports were 3,858,692 net tons which was 247,387 tons greater than what we saw during the month of June. License data is pointing toward a slightly lower total volume for total steel imports during the month of August. […]
Flat rolled steel prices remained holiday bound and buyers are waiting to see if there is any movement based on the latest lead times and needs that the domestic mills might have. With the combination of the Labor Day holiday on Monday of this week, coupled with inventories starting to rise at service centers (according […]
Flat rolled steel prices continued to slip this past week according to our analysis of the various flat rolled price indexes we follow on a regular basis. The benchmark hot rolled average dropped $6 per ton to $671 per ton with SMU being the lowest at $665 and SteelBenchmarker the highest at $677 per ton. […]
Based on our conversations with steel buyers and analysis of the data we received from steel mills, service centers and end users, we saw some slippage in flat rolled steel prices this week. Not enough to change our position (Neutral) on the market. But, there was enough to make us sit up and take notice. […]
Since last week licenses for foreign steel to be imported into the United States during the month of August have retreated slightly and the latest data is now leaning toward import levels to be very close to the just released Preliminary Census number for July of 3.8 million net tons. At this moment, and I […]
A number of steel mills have joined Nucor and US Steel by adjusting their coating extras on galvanized steel. Wheeling Nisshin advised their customers on Monday of this week that they were going to the new U.S. Steel galvanized extras. Severstal also made adjustments to their mills extras but they did not come out with […]
This week will be the last week we will use the old USS extras in our .060″ G90 galvanized index and cost calculations. The extra is changing from $3.00/cwt to $3.45/cwt. Please make a note of this. Before the end of this week we will revise our Price Estimator on the website to incorporate the […]
The spreads between the various steel price indexes watched on a weekly basis by Steel Market Update have been shrinking. With the exception of plate (which had price increase announcements during the week) and SMU cold rolled, all of the other flat rolled steel price indices either moved sideways or moved lower this past week. […]
The US International Trade Commission announced Friday that it will impose anti-dumping duties on imports from six of the nine countries accused by U.S. steel producers of dumping OCTG in the US market. The decision includes Korea, who was previously excluded in the preliminary decision, India, Taiwan, Turkey, Ukraine and Vietnam. The Philippines and Thailand […]
Average mill lead times declined ever so slightly across all of the flat rolled steel products being watched by Steel Market Update. We have seen lead times bouncing within a relatively narrow range over the past couple of months as we continue to see a stable market. Hot rolled lead times averaged 4.30 weeks down […]
Based on our latest Steel Market Update analysis of the flat rolled steel markets, we are learning that the domestic steel mills were more willing to negotiate galvanized and Galvalume pricing than hot rolled and cold rolled steel pricing. The largest movement we saw was on Galvalume where 64 percent of our respondents reported the […]
“Everyone wants business,” is how the conversation began with one of our Midwest service center sources. “Everyone has steel to sell,” is what he told us. However, he admitted that the bottom has not dropped out of this market. That feeling of concern was heard in a number of places. Flat rolled steel prices seem […]
Steel Market Update (SMU) analyzes foreign steel import license data on a weekly basis. From the data we can see where import tonnages are trending although we are not comfortable calling a specific number as the license data can be suspect until after the month is over. For the second week August license data is […]
Steel Market Update (SMU) has been looking at the growth of each flat rolled product during the first six months 2014 vs. the first six months 2013. What we found is how foreign steel has been usurping much of the apparent steel supply growth from the U.S. steel mills. Hot rolled shipments out of the […]
Spreads between the indexes are beginning to narrow as the market has been trending sideways (with a slight upward bias) for a number of weeks. Benchmark hot rolled numbers were up $2 per ton due to SteelBenchmarker reporting new numbers this past week (SteelBenchmarker only reports prices twice per month). The average of all the […]
Early indications, based on steel import license data, are suggesting August steel imports will once again exceed 3.5 million net tons and could go as high as 4.0 million tons. The high so far this year was May at 4.033 million net tons. May 2014 was also the highest import level seen since prior to […]
Ohio-based service center Heidtman Steel announced production for its new slitting facility in East Chicago, Ind. is expected to begin in early September. Installation of equipment is nearly complete and trial runs will begin later this month. Full production is anticipated by October. The 120,000 sq. ft. facility houses an Alcos brand Advance High Strength […]
I got a note from a manufacturing company regarding the size of the Nucor move on galvanized coating extras. The comment that was made was, “Zinc average for 2014 is up 8.6% since average of 2012. Nucor increase is way too high.” This steel buyer went on to comment, “Aluminum average in same time period […]
The market continues to be firm and prices have remained relatively stable over the past few weeks. We are finding the number of outliers, those companies buying at the extreme highs or extreme lows has shrunk. Most products are being offered close to the averages referenced below. At the moment the weakest products appears to […]
We spent the last two days canvassing as many buyers and mill sellers of steel as we possibly could. Our goal was to gather enough information so we could speak to the development of this market and the direction prices should go from here. What we found is a market that is perhaps stronger than […]
Flat rolled steel price indexes followed by Steel Market Update on a weekly basis saw prices continuing to be firm to slightly higher on most products. Benchmark hot rolled coil prices averaged $676 per ton, up $2 per ton compared to the previous week’s average. SMU HRC pricing remained stable at $675 per ton while […]
Total shipments of sheet and strip products including hot rolled, cold rolled and all coated products were down by 0.6 percent year to date (YTD) compared to the first half of 2013. In the second quarter of 2014 compared to the first quarter, the total tonnage was down by 0.7 percent and comparing Q2 2014 […]
Domestic steel mill lead times on flat rolled steel are starting to extend compared to what we measured two weeks back. For most of the year lead times have been running within a relatively narrow window (see graph). The new data is suggesting lead times may be breaking above normal patterns. Based on our latest […]
Based on the latest flat rolled steel market survey conducted by Steel Market Update since the beginning of this week, steel buyers and sellers reported the domestic mills as being less willing to negotiate hot rolled steel prices and continue to be less willing to negotiate cold rolled prices. When we reviewed the data on […]
Steel Market Update is conducting one of our flat rolled steel market surveys this week. Part of our survey deals with hot rolled pricing, cold rolled pricing, galvanized and Galvalume pricing and what is available in the spot market this week. We are market conditions as being firm but not too firm. Steel executives, buyers […]
Last week flat rolled steel prices moved higher by modest amounts, $5 per ton or less with a couple exceptions (see table below). Since the beginning of July our SMU steel price index has seen hot rolled prices move higher by $15 per ton, cold rolled prices by $10, galvanized prices by $10 and Galvalume […]
ArcelorMittal Dofasco is conducting a two phase upgrade of its galvanizing lines. Phase 1 includes a new heavy gauge galvanize line (#6 Galvinize Line) that will have AHSS capability and a capacity of 660ktpy. Phase 2 includes the conversion of the #4 galvanize line to a dual pot line. The #4 line is expected to […]
ArcelorMittal posted a profit of $52 million in the second quarter, following a string of quarterly losses that included a $205 million loss in Q1 2014 and a $780 million loss in Q2 2013. Steel shipments increased by 2.5 percent y/y to 21.5 million tonnes (23.7 million net tons). Net debt decreased to $17.4 billion […]
At the end of each month Steel Market Update takes a look back at the data we have compiled and does a quick analysis for our readers. This is different than our SMU Key Market Indicators which is also included in this newsletter. Benchmark hot rolled coil prices averaged $667 per ton (SMU) for the […]