Premium subscribers to Steel Market Update have access to reports on SMU’s website that break out the import tonnage into district of entry and source nation for six sheet and plate categories. SMU has now developed reports that drill down to provide more product detail on hot rolled and cold rolled coil. We report these […]
This Steel Market Update report examines the import share of sheet, plate, long and tubular products and 16 subcategories through May. Table 1 shows total supply to the market in three months through May and in 12 months through May for the four product groups and the 16 subcategories. Supply to the market is the […]
Manufacturing companies have a different perspective on service center spot pricing than what the service centers themselves reported to Steel Market Update during the first week of July. We are about to survey steel buyers as we work on our mid-July flat rolled and plate steel market trends analysis. Prior to the new survey, we […]
Imports of other metallic coated sheet (OMC) into the U.S. as a whole were down by 17.6 percent in May year to date, according to Steel Market Update’s latest analysis of federal data. The Great Lakes region was up by 10.5 percent and the South Atlantic was down by 35.8 percent. SMU now has a […]
Imports of hot-dipped galvanized sheet into the U.S. as a whole were down by 10.9 percent year to date through May, according to Steel Market Update’s latest analysis of Commerce and ITC data. SMU now has a comprehensive series of import reports ranging from the first look at license data to the very detailed look […]
This analysis breaks down the imported tonnage of six flat rolled products into the district of entry and the source country. We believe that misinformation (or lack of) about local import volumes is often used to influence purchase decisions. Our intent with this analysis is to describe in detail what is going on in a […]
Steel buyers are divided on whether prices have peaked, but most would agree that if they do move higher, any increase will be modest. Steel Market Update canvassed sources this week. Said one executive, expressing a common view: “I don’t see prices rising. I feel we are at the top.” Others anticipate a modest uptick […]
U.S. steel exports in May 2018 totaled 857,673 net tons (778,069 metric tons), flat over April but down 14.8 percent from May 2017 (which was at a 30-month high). Total exports have averaged around 860,000 tons the last few months. The total May export figure is a few thousand tons below the three-month moving average […]
Flat rolled steel prices were stable to moderately lower this week. Benchmark hot rolled coil was unchanged and, along with plate, is the strongest of the products followed by Steel Market Update. Cold rolled and galvanized index averages were lower compared to one week ago, while Galvalume was unchanged. September orders for plate delivered to […]
Steel Market Update has adjusted our SMU Price Momentum to Neutral from Higher on all products except plate, which remains at Higher for the moment. We chose to move at this time due to weakness we are seeing in the cold rolled and coated steel markets, with mild price erosion already evident in certain markets. […]
On Friday, July 6, the U.S. Department of Commerce released Final Census Data on foreign steel imports for the month of May 2018. May imports totaled 2,929,652 net tons, which was 824,335 tons less than the prior month. The import license data collected through July 6 shows June foreign steel imports to be on pace […]
Flat rolled steel imports into the United States continue to decline. The three-month moving average (3MMA) for rolled product imports into the U.S. year over year was down by 11.3 percent as of June, according to Steel Market Update’s latest analysis of Commerce Department license data. This is an early look at June’s import volume […]
My understanding is the salespeople at the former CSN Terre Haute, Ind., steel mill will remain with Steel Dynamics. SDI did something similar when they purchased what is now SDI Columbus, Miss. I have heard that Paul Navetta is the sales manager at SDI Terre Haute. I also understand that Jerry Richardson will remain with […]
The data from Steel Market Update’s latest market trends questionnaire shows mixed feelings when it comes to Current vs. Future Sentiment. The SMU Steel Buyers Sentiment Index measures how buyers and sellers of flat rolled and plate steels feel about their companies’ ability to be successful both now (Current) and three to six months into […]
Steel executives canvassed by Steel Market Update this week reported that demand remains strong, though they are less confident about conditions later in the year. Many expressed concern about the tariffs and trade issues unfolding in Washington, difficulty with trucking and logistics, and the impact of high steel prices on their customers. Following are some […]
I will be in my office on Monday and Tuesday of this week before traveling to Maine to speak to the Chain Link Fence Manufacturers Institute on Thursday. I have a very busy schedule over the next couple of months leading up to our 8th SMU Steel Summit Conference on Aug. 27-29. I hope I […]
The following report is normally provided to data providers and Premium level members of Steel Market Update: Steel Market Update began collecting flat rolled and plate inventories information from our participating service centers beginning on Monday of this week. The following is our “Flash” report, which is derived from at least 50 percent of the […]
Ryerson Holding Corp. has complete the acquisition of Central Steel & Wire Co. Central Steel & Wire will be a wholly-owned subsidiary of Ryerson and will continue to operate under its brand name. “The inclusion of Central Steel & Wire into the Ryerson family of highly valued industrial metal distribution and processing companies enhances Ryerson’s […]
Good evening from another sunny and warm day in London. Diana and I have been here since Wednesday morning of last week. We spent two full days at the headquarters of the CRU Group and another two and a half days sightseeing around London as this is our first trip to England. Having spent a […]
On Tuesday, the U.S. Department of Commerce reported preliminary steel import license data for May at 2,886,606 net tons, a decrease of 23 percent from the April high and a decrease of 17 percent compared to the same month last year. Updated June license data was also released; taking the daily license rate and spreading […]
Steel Market Update canvassed steel buyers over the past two days and found that flat rolled prices are mixed and plate prices are rising. Two of our flat rolled indices increased over the prior week, and two of them declined, while the plate index rose. Here is how we see prices this week: Hot Rolled […]
We are in the middle of a U.S. holiday week, and the Fourth of July on a Wednesday gave plenty of steel buyers and sellers an excuse for taking the week off, or at least an extended long weekend. Benchmark hot rolled prices were seen as being modestly lower based on the responses received from […]
What are the issues affecting price negotiations? What is the direction of spot pricing? Steel Market Update canvassed the market this week to gather executives’ perspectives. Following are some insightful comments: Q: What are you seeing as the biggest issue affecting price negotiations with your suppliers? A: “Supply is constrained. That is the biggest issue.” A: […]
U.S. Steel has promoted Daniel M. Killeen to the position of General Manager Gary Works effective immediately. Killeen will be responsible for the day-to-day operations of U.S. Steel’s largest integrated steelmaking facility. Killeen joined U.S. Steel in 1996 as a Management Associate at Gary Works. He went on to work in a series of increasingly […]
JSW Steel plans to pump $500 million into its newly acquired Acero Junction steel mill in a two-phase investment. The first $250 million includes the cost of acquisition, the revamp and restart of the electric arc furnace and slab caster, and modernization of the hot strip mill. The second phase will be dependent “upon the […]
There are big differences in the year-to-date increase of coiled plate imports on a regional basis. Last week, we published new regional import reports for HRC, CRC and HDG. This week we are publishing new reports for coiled and cut-to-length plate based on the new format. SMU produces import reports by product at the national […]
There are big differences in the year-to-date increase of cut-to-length plate imports on a regional basis. Last week, we published new regional import reports for HRC, CRC and HDG. This week, we are publishing reports for coiled and cut-to-length plate based on the new format. SMU produces import reports by product at the national level […]
The data from Steel Market Update’s latest market trends questionnaire shows some erosion in Future Sentiment. The SMU Steel Buyers Sentiment Index measures how buyers and sellers of flat rolled and plate steels feel about their companies’ ability to be successful both now and three to six months into the future. Buyers and sellers of […]
The Commerce Department’s procedure for filing requests to have products excluded from the Section 232 steel tariffs has been called confusing and burdensome by many companies, some of which have been thwarted in their attempts to file. Applications can be rejected for something as simple as an inaccurate Harmonized Tariff Schedule (HTS) code. In testimony […]
On Tuesday, the U.S. Department of Commerce reported foreign steel import license data for the first 19 days of June. The data is indicating to Steel Market Update a significant drop in imported foreign steel. Taking the daily license rate and spreading it across the 30 days of June, we see the month trending toward […]